Search results

  1. wooky30014

    New Boat For Christmas

    After having to do a couple of recuts, adding the angle that I had overlooked and a recoat of varnish on the raw wood I finally now have the new windshield frame installed My first endeavor with more than just straight cuts and while not "perfect" it is functional and (I believe) watertight at...
  2. wooky30014

    New Boat For Christmas

    Thanks Cap, I think part might be an "OCD" thing, I know this isn't perfect but that doesn't matter as it IS going to be functional in holding up the leading edge of the top. I've got a couple of ideas rolling around in me cranial cavity about the window "treatments", first and foremost not...
  3. wooky30014

    New Boat For Christmas

    Been a while since . . . . . Thanks Mike. The old and original woodwork needed some refurb and replacement done (hey it's ONLY a year younger than me), lots of good stuff still there that I've been reusing where I can and some, not so much. The last month or so I've been on a sho-nuff learning...
  4. wooky30014

    New Boat For Christmas

    Two things on that, I've seen videos on steaming being done, I don't have a steam box and the frame itself isn't bowed. They are all straight with the exception of where it sits/sets on the cabin roof. L & R base pieces measure at just shy of 3 ft, a bit more when figuring the angles at the...
  5. wooky30014

    New Boat For Christmas

    I went and picked up part of the mahogany wood ordered, the other shorter pieces will be delivered tomorrow (don't ask me, it's how they do things LOL) Now so's I don't mess up some fine looking planks, I've got to figure out how to put the ever so slight curve into the bottom edge to match the...
  6. wooky30014

    New Boat For Christmas

    Oh, just saw where this thread was moved to Boat Resto, no problem, juss so's it's on here somewheres
  7. wooky30014

    New Boat For Christmas

    Been a little bit but have's ya ever had a string of days that ya juss din't feel like doin' much 'cept maybe ta melt into yer chair, yep, had a few of them but still piddled a little here and there, plus an MD appointment and yeah, everything is "normal" The other day I reconfigured the tarp...
  8. wooky30014

    New Boat For Christmas

    Lieutenant Dan :D, Thank You for the heads up on that, I'll go check that out. This particular one / type is the grey / silver Permatex Neverseize and this is the first time used on a submersible assembly and I'll put what I find on here
  9. wooky30014

    New Boat For Christmas

    Yeah Willy, he knows of the good Scottish 🏴󠁧󠁢󠁳󠁣󠁴󠁿 stock he comes from and he's proud of the Clan we come from, he did some research of the family branches and one I knew of, two brothers in the Olde Country were fined for not making their hooch 🥃🍾 strong enough and another that I didn't know was...
  10. wooky30014

    New Boat For Christmas

    Thanks Cap, yeah he could but the 26 acres were bought (and he tried to get another 10 acre tract next to his, 2 of them owned by the same guy) for deer hunting. I looked on Google-Earth and looks to be another 100 acres or so backing up to his and the other 2 tracts so not as much worry about...
  11. wooky30014

    New Boat For Christmas

    And yeah, did a partial systems runup / check, bilge pump and tilt-o-matic work, and the motor spins over like it should, didn't fire as the kill switch was "off"
  12. wooky30014

    New Boat For Christmas

    Well, it's been a month since I posted anything. LIFE happens LOL, betwixt the rain 🌧️⛈️, some cooler weather 🥶, an electrical issue with the house, now fixed, an early morning trip to the Flughafen 🛬 to pick up my son and soon to be new daughter-in-law 👫, they came in for the weekend over in...
  13. wooky30014

    New Boat For Christmas

    Yeah, I think its the angle. I bought a "grey market" Euro SEC, it was a non runner, for the Euro parts which the bumpers were a big plus along with the AMG Penta lookalike wheels. I snagged a bunch of stuff off that parts car including the headlight switch panel with the thumbwheel for...
  14. wooky30014

    New Boat For Christmas

    Thanks Cap, on the wiring, the engine control cable (pulled from a former project boat) that covers the electrical operation was JUST long enough so I ordered a few items, a bundle/pack of 11 different color wires in 16Ga 50ft each, a 25 ft braided cable sleeve to make a new cable with adequate...
  15. wooky30014

    New Boat For Christmas

    I got some more done today, a bit warmer here. The helm is sitting in place and for now being held with just one screw, it's sitting on a piece of wood along the bottom edge so no worries. Wiring is exposed a little but I'm not going to worry about that right now. Most of the wire feeds are in...
  16. wooky30014

    New Boat For Christmas

    Ok boyz n gurls and children of all ages, I've been tinkering and doing little things betwixt the rain and now unseasonably warm for February, up into the 70s. I've got the new cabin walls in place and screwed down, this was after cutting a new roof "bow" to go with the original. Cabin walls are...
  17. wooky30014

    New Boat For Christmas

    Yeah, I forgot all about FlexSeal LOL, concentrating too much on the problem, I'll get a can of that, should still look good and just thought about adding a molding to the joint gaps. I've got some Total Boat CPES here but read it has no UV protection I'm not a big fan on having to do the...
  18. wooky30014

    New Boat For Christmas

    Thanks Cap, I'm trying. I got the deck all screwed down now, screw heads and generally will get another coat of grey. Now for a 64 dollar inquiry, this spar urethane I've been using, supposed to seal the wood for indoor and outdoor BUT I just found a little bit of delam on the wall boards, 4...
  19. wooky30014

    New Boat For Christmas

    ???
  20. wooky30014

    New Boat For Christmas

    Got a LOT done (for me anyway) betwixt the sprinkling and showers today. I got the port and starboard deck screwed down, the center is in place but I had to fashion a (don't know the correct and proper name for it) splice board to connect where the split is, NOT going to use the 2X6 piece that...
Top