Search results

  1. Y

    1996 Mercury 30 HP Primer Bulb Routing

    Thanks for responding. I know what you mean about the solenoid activated key switch primer, but this engine doesn’t have that. The key pushes in, but the wires from the controls don’t connect to anything. It’s a Mercury 30 HP ELHO. No electric primer or manual choke- only the purge button above...
  2. Y

    1996 Mercury 30 HP Primer Bulb Routing

    Trying to get my 1996 ELHO 2 stroke started. New mixed gas, carburetor, fuel pump, fuel filter, and plugs. Starts right up with a gas/oil mix via spray bottle to the carb, but doesn’t continue to run. No fuel leaks and tank primer ball and fuel pump deliver fuel to the carb bowl (checked both...
  3. Y

    Low voltage at fuel sender

    Trying to figure out problem with fuel gauge/ sending unit components which have been inoperable from r some time. On the back of the gauge, with the key on, I get 12 volts at the gauge ignition terminal and about 5 volts at the gauge sender terminal. At the fuel sender end, the wires are...
  4. Y

    Intermittent starter problem

    2015 Mercury 150 HP 4 stroke. Starter works intermittently. Driving me crazy. Changed switch, bypassed battery cables and perko with new cables, cleaned all connections. I get a warning beep each time I turn the key on, and yellow wire on solenoid shows 12 volts every time I turn key to start...
  5. Y

    Mercury 150 HP Rebuild Dilemna

    My 1999 Mercury 150 HP outboard threw a connecting rod last week. Motor always ran great, had only about 550 hours on it. No oil alarm (alarm in working order); not overheated at time of seizure. Running about 4000 rpm. Toying with the idea of purchasing a rebuilt powerhead from one of the...
  6. Y

    Shore Power How-To Help

    I have a 1999 27' Searay Sundancer equipped with a Marinco 30 Amp, 125 Volt Shore Power system that I have no idea how to use. I bought the boat slightly used in 2002 and have never had a reason to try it out. We're planning a short trip to a marina next week and thought of actually using the...
  7. Y

    Left-Hand or Right-Hand Engine ?

    I have a single 7.4 Bravo III sterndrive in my 27' Searay. I recently removed the engine-driven seawater pump for replacement and neglected to note the positions of the two 1-1/2" water hoses to the nipples on the plastic impeller housing. Near one nipple is stamped "RH Out", and the other "LH...
Top