Search results

  1. W

    1961 Sea King

    Can anyone tell me what a 1961 Sea King boat on original trailer, in great condition would be worth? :confused: Thanks for any help.
  2. W

    40hp merc. cant find model #

    can someone tell me were to find the model # on 40hp merc.?
  3. W

    79 6hp e-rude wont hold wot

    I have a 1979 6hp E-rude; it will run up to wot for about 30 seconds then die down to less than :confused: half throtle. Was told the high speed jet causes that, so i rebuilt the carb. Motor still runs great at low to mid range throtle, but same reaction at wot. I can pull the choke half way...
  4. W

    what to do next

    O.K. I have a1980 astroglass shallow v, with a 1979 70 hp johnson with 12 3/4 x 21 cupped prop. The boat runs 5900 rpms/32mph at wot. The tilt is in the middle setting hole. If i raise one hole it ventalates and slows down. If i drop one hole it digs the nose and slows down. I started out at...
  5. W

    prop question

    I had originally posted about being under proped and ventalating. I had nice fellow help out with that," greatly appreciate it". I now have a 12 3/4 x 21 cupped prop on a 15' shallow v astroglass.Boat and motor is 1050lb + me, wife = 300. gear, and 15gallons fuel.Boat runs 30mph at 5900 rpm...
  6. W

    gaining horse power

    I currently have a 1979 70 hp johnson. Was curious if I could raise hp with engine rebuild? If so, does any one know how much hp gain is to be expected? Would it be more cost effective to sell and buy bigger? current motor has less than 300 hours. :confused:
  7. W

    Spun hub

    Thanks for all your advise. I only have one more question. If the boat still has good hole shot, can the hub still be spun? The Motor i had referd to earlier 70 hp johnson bogged down in the hole, stood noes of boat up and took off in about 8 seconds. could the hub be slipping at high rpm, or is...
  8. W

    rpm problem

    I have recently bought a 1980 15' astroglass v bottom boat that weighs about 890 lb. plus motor and fuel with a 1979 70 hp johnson motor. The problem i am having is that the engine is turning almost 7000 rpms at full throtle, running close to 23mph. I know this rpm is to high, I also know the...
Top