Search results

  1. M

    Dpsm 1.95:1 outdrive toast

    So the bearing is gone. Snap ring goes on the inside lip of the carrier housing and holds seals/bearings in place. The yoke is indeed held into place with a washer and bolt which obviously sheared off. Gears look good and from what I can tell the metal shavings are from the bearing. Is it...
  2. M

    Dpsm 1.95:1 outdrive toast

    8 and 19 looks like a bolt and washer. I’ll remove the carrier bearing and let you know.
  3. M

    Dpsm 1.95:1 outdrive toast

    Yearly. Bellows are good. Yoke seal is destroyed which I believe is where the leak is from… at least one leak.
  4. M

    Dpsm 1.95:1 outdrive toast

    So the snap ring 10 holds that in place? Haven’t found that yet. Time to tear it open. 11 is the seal which you can see in the pics above are junk. Hoping I can maybe get a new seal and snap ring and hopefully the bearing and gears aren’t junk… highly unlikely I know.
  5. M

    Dpsm 1.95:1 outdrive toast

    Hauling the boat out for the winter I was on my way to the ramp and heard a thud and the engine died. Tried to get it started again and it wouldn’t turn over. Thought I may have hit something or picked up some line. I lifted the drive and nothing in the props. Tried again and got it running...
  6. M

    DPSM gimbal bearing

    All set. Thank you!
  7. M

    DPSM gimbal bearing

    So I have the serial number for both the drive and the transom assembly. Is there a site I can use to enter the serial number and find correct parts? Thank you again.
  8. M

    DPSM gimbal bearing

    Do you have a Volvo part number for that?
  9. M

    DPSM gimbal bearing

    I cannot find the correct part number for the gimbal bearing for a Dpsm. If anyone has a part number it would be appreciated. I am not looking for the new greaseless one. I would like to grease it. Also, stripped the zerk fitting out of the plastic tube so I am looking for part numbers for the...
  10. M

    Trim tab options

    **Update. I learn a lot about boats in forums such as this. Doing research it bothers me when there are ideas given but the op doesn’t give the final results to tell what worked/didn’t work. So here we go… I went with Bennett marine 12x16 sport tabs. I wasn’t sure if it would be enough for my...
  11. M

    Trim tab options

    That’s good info. 2550 is pretty close in size. Trying to keep the width as shallow as possible for easier and better mounting position and was looking at the sport option. Idk about wanting a double piston but was looking at the xpt model. A bit more pricey but just another question to ask...
  12. M

    Trim tab options

    I’m actually leading toward the hydraulic system now and would love the m120 which is hydraulic. Says for boats up to 23feet though so at 28 I’m not sure it will be enough even with the 30% more lifting power as advertised. Curious what Bennett has to say.
  13. M

    Trim tab options

    Ok. So I don’t need to be perfectly parallel with the bottom. I’ll obviously call Bennett on Monday to see what they suggest but that is an idea. Thanks.
  14. M

    Trim tab options

    *flush
  15. M

    Trim tab options

    Ok. So mount it flick with the bottom and let it hang over the bottom on the onboard side? 12x12 would be enough for a 28’boat?
  16. M

    Trim tab options

    I’m aware of that. But the tab extends over the strake and continues over to the bottom between the strake and centerline. Looking at my picture follow the red line… the bottom is not a straight line.
  17. M

    Trim tab options

    That’s the plan. Just seeing if anyone had similar problems or experience to get me through until they open on Monday. Thanks.
  18. M

    Trim tab options

    You can see in this picture it does not line up
  19. M

    Trim tab options

    I have a 28 foot master marine. Large center console but not very wide. Deep v. Anyway I am getting some trim tabs… ordered Bennett bolt electric 24x12. As recommended in the size chart supplied from Bennett I fit within the recommendations. After ordering I was measuring placement and realized...
  20. M

    Dual Batteries/electrical iasue.

    I'm having issues with my batteries draining. I have dual batteries set up on a 1-all-2 switch. I had an issue last year with the batteries which were 4 years old so I replaced them last season. Every time I would go out to the boat this the batteries would seem to get weaker and weaker. I have...
Top