Search results

  1. M

    86 VRO 50 Electric Primer Fuse

    I've got a 86 VRO 50 that as soon as I push in the key to choke it it blows the fuse and then you can't turn over the engine. It starts fine when you use the manual side of the primer. I also had the engine blow up because the oiler isn't working. I just rebuilt it and I might possibly have...
  2. M

    Anybody got a junk DT 75 or DT 85

    I need a exhaust housing and an engine holder for a 1993 dt85. The part # for the ehaust housing is 52311-94701, engine holder part# is 51111-95602-OED
  3. M

    93Suzuki DT85 Power Head Removal

    I'm trying to remove the power head on my DT85. I've removed all 8 bolts under the covers. Is there something I might have missed. My book says to rotate the prop if you have problems pulling the head. I tried that and it didn't work so I pulled the lower unit with no problems. The book I have...
  4. M

    water everywhere part 2

    Thanks for responding Jim & Bo.<br />I just pulled it apart again and the water tube is only about 12 inches long. The gromets appear to be fine. Is there another at the power head? If so how do I go about checking or replacing? My manual isn't very specific about the cooling system.<br...
  5. M

    93 suzuki DT85 water everywhere please help

    I've got water running out of the the usual spots plus a lot of water coming out of top of the shaft housing towards the front of the engine. Seems to coming out right below the engine cowling by where the shifter hooks up. Could it be the water tube gromet not sealing? I've replaced the...
  6. M

    cooling problems 93 DT85

    I,ve just replaced the impeller, t-stat and head gasket on my 93 DT85. The water jackets in the head were full of salt corrosion. I get good water flow out the pee hole at 2000 rpms or better but heats up at idle. I also noticed there is a lot of water coming out of the top, rear of shifter...
Top