Search results

  1. whitejd12

    '72 18 hp Evinrude. Small water leak from new head gasket. Normal?? HELP PLEASE!!

    Re: '72 18 hp Evinrude. Small water leak from new head gasket. Normal?? Re: '72 18 hp Evinrude. Small water leak from new head gasket. Normal?? racerone.......I don't think I should be pounding on the top of the head w/a center punch. I can see that ending bad. :eek: Here's two pics of the...
  2. whitejd12

    72 18hp Evinrude starter is not engaging flywheel.

    B OK, got everything back together and was gonna check compression and as you can see in the video, the starter motor is spinning but will not rise up and engage the flywheel. :mad: It was working fine yesterday, I don't get it. I did check compression by pull starting it and got a really good...
  3. whitejd12

    '72 18 hp Evinrude. Small water leak from new head gasket. Normal?? HELP PLEASE!!

    OK, I was stressing yesterday,:eek: but I'm back, the motor is NOT at the bottom of the lake! :) I'm so thankful for this site.:D Since the little crack that I thought was certain death for the old girl, is not, I can get back to the last little problem before calling this restoration complete...
  4. whitejd12

    72 18hp Evinrude....all that time....I think it's junk now! HELP!!

    Re: 72 18hp Evinrude....all that time....I think it's junk now! HELP!! kfa4303......that makes me feel better. About the grey poop anyway. The crack.....I'm worried. Here's a better picture. I have the LU off. Down at the bottom i scraped away the paint where the crack is. One of the LU bolts...
  5. whitejd12

    72 18hp Evinrude....all that time....I think it's junk now! HELP!!

    Re: 72 18hp Evinrude....all that time....I think it's junk now! HELP!! This is what the inside looked like after running in barrel. Normal?? Oil everywhere. Even leaking out a hole in side. IDK!
  6. whitejd12

    72 18hp Evinrude....all that time....I think it's junk now! HELP!!

    Re: 72 18hp Evinrude....all that time....I think it's junk now! HELP!! Here's a better picture of the crack. Is this something that can be JB Welded? Or what about putting some kinda sealant up inside the bolt hole and then use a shorter bolt for LU? The bolt is what cracked it when tightened...
  7. whitejd12

    72 18hp Evinrude....all that time....I think it's junk now! HELP!!

    Well, it's ruined!!!! I'm sooooo mad! I've spent so much time on this thing. I finally had it just about done and running good. See that little dimple in the middle of the picture? That's the bottom of the exhaust housing. One of the bolts holding on the lower unit actuially pressed up through...
  8. whitejd12

    72 Evinrude 18hp new head gasket installed but leaking. :( HELP!

    Re: 72 Evinrude 18hp new head gasket installed but leaking. :( HELP! Well, it's ruined!!!! I'm sooooo mad! I've spent so much time on this thing. I finally had it just about done and running good. See that little dimple in the middle of the picture? That's the bottom of the exhaust housing...
  9. whitejd12

    72 Evinrude 18hp new head gasket installed but leaking. :( HELP!

    Re: 72 Evinrude 18hp new head gasket installed but leaking. :( HELP! . Just emptied out all the water from tub I was running it in. Wow!! Holy oil! The water was filled with oil and this picture is of the motor after coming out of it. What's that all about?
  10. whitejd12

    72 Evinrude 18hp new head gasket installed but leaking. :( HELP!

    Hey everyone. This is a 7 second video. I got the new head gasket installed and everything torqued to specs. Started up and is running great except this water spitting out the top of head. WTH!? I ran it in driveway for a while and got it warmed up and retorqued the bolts. Still leaking. Someone...
  11. whitejd12

    72 evinrude 18hp, pics of head and pistons. Clean or what??

    Hey everyone, I'm waiting on the head gasket. I've attached a pic of the head. I think I've got it cleaned up pretty good.....yes?? What about the pistons and block surface? What can I use to clean them up? I can tell they've been hot, but I don't think they look too bad. My plan is to put the...
  12. whitejd12

    Head bolts question 72 evinrude??

    Why on the parts diagram for cylinder and crankcase, for my 72 evinrude 18202r does it show needing 10 head bolts and only 8 washers. Parts # 22 and #30. Do two of the head bolts not have washers? I have 10 bolts and 9 of them have washers. Just a little confused and if I only need 8 washers...
  13. whitejd12

    72 evinrude 18hp head prep for new head gasket

    I have a new head gasket ordered. While I'm waiting can I do anything to clean up the head before reinstalling it? I know about laying it on a sheet of glass and using sandpaper to clean up and true it, but should I soak it in parts cleaner, or scrub it down or anything?
  14. whitejd12

    72 Evinrude 18hp still running HOT! Ugh!

    Apr 20, 2014 - YouTube Hey everyone I'm back. With the same problem. Watch the two videos in order (the 2nd video is in next post), it's all one video but I had to stop and start again. Took it out on lake, thought I had the problem fixed. If you all remember, I still had tape over the water...
  15. whitejd12

    Thermostat cover gasket replacement?? 72 Evinrude 18hp

    Hey everyone, I received my new thermostat housing gasket. Just wondering if I need to use any gasket sealant or anything, or just put it in with nothing. I have Permatex Black silicone adhesive sealant. Should I use that, or something else or nothing? Happy Easter!!
  16. whitejd12

    Water intake screen replacement 72 Evinrude 18hp

    Hey all, I've started a new thread since my last one has pretty much been solved. Now on to the next problem. I've decided to try to replace the water intake screen but how do I do it? I've ordered both the screen and plug , but by looking at it, don't know how I'm gonna get the old plug out...
  17. whitejd12

    18hp evinrude. Running HOT! Leaking from carb. Wth!

    Apr 12, 2014 - YouTube Here's a 1 min video. She was running good then....not. She was smoking hot when it quit too. Also, noticed fuel or water leaking from hole in front bottom of carb. Did I forget a screw or something. It was pouring out of the opening right in center of the pic. Thermostat...
  18. whitejd12

    1972 18hp evinrude, Model# 18202R/ head bolt torque specs & sequence

    I'm re-installing a new head assy and not sure what torque and sequence to tighten bolts. Also, is there a torque for the 3 thermostat bolts? Thanks a lot!!
  19. whitejd12

    Wiring switch to starter solenoid etc.

    Re: Wiring switch to starter solenoid etc. Ok. I can't do much else until the snow goes away and I can get my boat back in the garage. Then I can get the key into the boat and get the battery in the boat and everything hooked up. So here's how I have it hooked up under the hood, positive...
  20. whitejd12

    Wiring switch to starter solenoid etc.

    Re: Wiring switch to starter solenoid etc. Couple more pics. Thanks all.
Top