Search results

  1. C

    New structure for fiberglass floor

    No Title here we are with our last works: we cut the floor (oukume marine plywood 1/8") and glued it on the structure with a mixture of polyester resin and paper cellulose. with the same mixture we filled the slots on the edges of the floor: we cut off the top cover of the boat, now there...
  2. C

    New structure for fiberglass floor

    No Title Hi guys, some news about our project! we decided to use the extruded polystyrene to make the 3 stringers (1 in the center and 2 on the sides). the material is pretty solid (not like the polystyrene made by little balls) and lighter than wood, we are going to cover it with 3-4 layers of...
  3. C

    New structure for fiberglass floor

    Hi, yesterday we placed a 1-layer patches externally over the holes, only for give to the hull the right lines, then we covered the edges with epoxy based filler product. The next step will be sanding that edges to rebuild the runners and after we will overlay the entire hull with 2 layer of...
  4. C

    New structure for fiberglass floor

    yesterday we covered up all the external hull with la layer of epoxy resin, today we are Going to repair the leaks externally
  5. C

    New structure for fiberglass floor

    today we divided the top cap from the hull and we finished to sand the remaining imperfections :) maybe the boat now will not float :)
  6. C

    New structure for fiberglass floor

    ok, thanks! yesterday we built the structure that hold the boat:
  7. C

    New structure for fiberglass floor

    alright, well: we sanded the hull using a grinder of this type: and as you can see we made those bad signs on the bow. the white-grey material that you see is "stucco" (?? idk the right term), however a stuff used for leveling the hull. in any case that photo is too old, now we sanded with a...
  8. C

    New structure for fiberglass floor

    mmh ok, then, is right you to know that we have already removed any sign of paint and gell-coat on the hull. our schedule now is to patch all the leaks. and here i've got a question for you: the existing layer of fiberglass is quite thin, how can we repair the leaks with the teqnique in the...
  9. C

    New structure for fiberglass floor

    Yeah i've got a Magnum Mariner 25HP:) and these are the images! we sanded al the hull and the top of the boat, now we have to cover it internally and externally with 2-3 layers of fiberglass, then we'll set the floor structure :)
  10. C

    New structure for fiberglass floor

    it's impossible to reuse the old materials, the wood inside of the fiberglass was rotten, spoiled, and even the type of wood of the sleepers is so heavy. i'm trying to found a new type of structure obviuosly in marine plywood... what do you think about this one? what about the thickness? the...
  11. C

    New structure for fiberglass floor

    Hi guys, i'm sorry for my not so good english, i'm italian! I need a help for the new floor structure of my boat: i bought a used boat and now i'm restructuring it. under the floor panel the old structure was like this: I cut and removed the central beam (the wood inside was rotten) and those...
Top