Search results

  1. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    Thank you for that. I guess I can trust it until I get a little better one.
  2. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    All of my previous meters did as well. I'm not sure why this one is different but the dial isn't as smooth as I would like it to be either. I am really don't know if I can trust it.
  3. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    I'm in the US but the meter was definitely made in China. I'm ordering a Fluke tomorrow just to make sure I'm getting legit readings.
  4. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    I'll try and carve some time out tomorrow and see what the real values are.
  5. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    I was reading the 1 on the left that I see with out the probes touching.
  6. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    I'm definitely confused by this. Without yalls help I would absolutely be stuck. I took this engine to a dude that said he could fix it a few months ago. I found intermittent spark on the same two cylinders after I water trialed it. Turns out he just swapped two 70hp coils on and called it a day.
  7. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    It is reading as if there is no continuity. I tested different spots on the block and pressed into the wire at the connector to be sure.
  8. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    Yessir. With the kill switch pulled so it couldn't fire. It spins over with no drag from the starter. I checked the brown lead to the block on 200ohm setting just to be sure and saw no reading.
  9. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    When set to DCV I am seeing 3.06v
  10. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    There weren't any in the box and this wasn't the cheapest one by far. I'll find some directions and post back.
  11. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    With the dva hooked up to the brown and red leads I saw 6.8v with the meter set to AC 200v.
  12. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    Mine reads 1 with no connection. If I touch the probes I see a 1 one the left side with no continuity and three digits on the right when there is.
  13. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    The adapter should be here this afternoon with the mail.
  14. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    Meter read "1" with no sign of continuity.
  15. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    The leads where voltage was measured were completely separated and wrapped to be sure. As far as I could chase the wires up the flywheel didn't look damaged either.
  16. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    Ok so with the red and brown leads unhooked from the cdi and voltmeter set to 200v AC I saw a max reading of 2.5v
  17. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    It wasn't on purpose. I ran outside while my newborn daughter was napping and ran the wrong setting in a rush.
  18. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    Yep I definitely had the wrong approach. I'll answer back when I get back on it this weekend.
  19. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    Well those were all DC so these are my AC readings. I pulled the plugs to do a compression test and all cylinders are between 110 and 118 but cylinder 4 (second down port side) looks like it has never fired but was wet.
  20. Jprevat

    Yamaha 200ETXN 1984 Stator Values

    So these are the measured values with a cheap voltmeter with no DVA. I circled the measurement where I found a null value but I'm not sure what that means as far as which part is faulty.
Top