Search results

  1. auger406

    Cold water coming out the prop and not much out ports

    Okay so sorry for the delay in posting the results. After the third install of the out drive, man I hate the gear lube oil, the issue was fixed its running like a top and cool. It was the pick up tube that was not aligned correctly with the upper even though it separated it on the the outdrew...
  2. auger406

    Cold water coming out the prop and not much out ports

    Rick, Funny I thought of this the other day but was hesitant to do it. Will test it tomorrow while waiting on impeller housing and upper housing seal for water pick up. Thanks again Rick.
  3. auger406

    Cold water coming out the prop and not much out ports

    This is what i have I believe.
  4. auger406

    Cold water coming out the prop and not much out ports

    Thank you for the schematics and the time you spent making to marks to spell it out for me. I have the out drive off and separated on the stand. I found the bushing up in the upper to have a gouge in it (on order). Also the SS housing has a grove on the the top (on order). After disassembly of...
  5. auger406

    Cold water coming out the prop and not much out ports

    Bottom right hose is not tied into the thermostat.It just runs underneth "t" off to each manifold. Reading an article states that water pressure can give you a faulty indication of impeller pumping, hence water coming out of drain point. I agree on debris would have to be be huge and since it...
  6. auger406

    Cold water coming out the prop and not much out ports

    Okay . Disconnected the hoses while running on muffs. See picture below from left to right clock wise disconnected hoses while running. 1) To Starboard manifold hose runs from under manifold to t stat- No water, or a dribble 2) To Port manifold hose runs from under manifold to t-stat - No water...
  7. auger406

    Cold water coming out the prop and not much out ports

    Wow, this makes so much sense. Okay once temp goes up all bit today, Im a cold weather wennie, its 50 now then will do this. I am going to order a new impeller kit with housing this time. Once this test is complete. Yes I agree on the swapping parts. I had the thermostat already and, yes it...
  8. auger406

    Cold water coming out the prop and not much out ports

    Grub, Im sorry to show my ignorance but don't know where the oil cooler is and how it interfaces with the water system
  9. auger406

    Cold water coming out the prop and not much out ports

    Rick, I plan to do this today. I will look at schematics to make sure it is the right one. So many hoses tied into the thermostat housing. I am going to order another kit. My question to you is what kit do you buy? I ordered the last one from GLM Part #12043, with this happening I am losing...
  10. auger406

    Cold water coming out the prop and not much out ports

    Okay thanks. I have thought about the circulating water pump as it is the original. Those flow diagrams are difficult to follow, for me anyways. Use to work and kids have not been able to constantly troubleshoot other than fix this then this. i am leaning towards buying a complete new impeller...
  11. auger406

    Cold water coming out the prop and not much out ports

    Sorry did not see this until after the post below. No sir not my system don't have a closed system. I believe this is for a closed system with the water pump in the diagram in the top left. I would snip mine but don have that on this computer
  12. auger406

    Cold water coming out the prop and not much out ports

    Ugg. So started it up and same thing. Zero discharge out the exhaust ports. I waited this time longer to make sure everything was full and the thermostat opened. Temp got up to just under 175 deg on my guage. Looked and no discharge. Steam coming out of the prop discharge. I shut it down. No...
  13. auger406

    Cold water coming out the prop and not much out ports

    Being methodical about replacing stuff. Replaced the original thermostat gasket, sealant, thermostat sleeve, and housing gasket. Waiting for a drain plug to come come tomorrow then will try it to see if it was the thermostat. Have not removed the stud riser with he potentially backwards gasket...
  14. auger406

    Cold water coming out the prop and not much out ports

    I just found a random drawing that shows the restrictor gasket in between the riser and manifold with the restricted side to the aft of the boat not the front as another drawing indicated? Does anybody know which way it goes ? Could it be that simple?
  15. auger406

    Cold water coming out the prop and not much out ports

    Well back to the drawing board. Ran it today now i am not getting any discharge out of the exhaust/ discharge ports. I started to see steam coming out and shut it down before it got hot. Both manifolds were warm to the touch. Can this problem be associated with the thermostat? Or possibly...
  16. auger406

    Replacing gear lube hose between transom and bell housing

    Yes this is a pain. I have smaller hands, however I struggeled to get this back on. I read some stuff on how to do it the easy way. It took a lot of prep time but this is what I did: 1) Dawn dishsoap on the barb, not in hose 2) A hair dryer or heat gun, get it good and hot 3) Might take two time...
  17. auger406

    Cold water coming out the prop and not much out ports

    Yes sir. Had a copy of it and should have put it on to start with. I learned a lot this time. Probably a combination of no sealant and pick up hose not lined up correctly. I also, notice the gasket had a tear might have been due to pulling it off but got a new one anyway. Looked a lot better...
  18. auger406

    Cold water coming out the prop and not much out ports

    See pictures around housing.
  19. auger406

    Cold water coming out the prop and not much out ports

    Well so I got it apart. Funny how easy it is when it was just apart yesterday. I am fairly certain the tube was misaligned or in backwards causing water to bypass. Have gasket, wear plate and gasket. One question, I might be over thinking this is it okay for small gaps around the pump housing...
  20. auger406

    Cold water coming out the prop and not much out ports

    Thanks Rick, After sleeping on it I figured the right thing to do was pull the entire unit. I have a metal stand that was awesome in all of this removal and install. I used it to to remove and replace the impeller and said wow this is so much easier. What was holding me up was on a previous out...
Top