Search results

  1. M

    What depth/fish finder do I want

    If you buy forward facing sonar...you know you have it
  2. M

    What depth/fish finder do I want

    Ignore it all. They all do everything you need and more. If you want any "cool features" they:re probably more on the mapping side. ALL of the hyped sonar features are for fishermen.
  3. M

    What depth/fish finder do I want

    An auto correct of "good transducer installation" Anything will fit the purpose you described. Get in a store and play with some to see what you like, and choose based on that.
  4. M

    What depth/fish finder do I want

    Chart plotters have maps that are likely quite handy for you. On the fish finder side almost anything is fine if you don't care about fishing. All that will really matter is getting a foot transducer installation.
  5. M

    1974 Chieftain 25 "Adventurer" Restoration

    That's a heck of a platform (and ladder). What's the height above waterline gonna be?
  6. M

    Why I do not have new boats.

    The bathtub curve never misses. New stuff is more likely to break than slightly older stuff that has had a time for the weak points to fail. Once those initial quality issues are worked out and the lemons filtered out...you get a long period of relative reliability. And finally stuff starts...
  7. M

    Why I do not have new boats.

    Except time on the water waiting on warranty service or computer diagnostics you can't do yourself.
  8. M

    Why I do not have new boats.

    I'd rather not pay the 5-10x premium it'd take to get into a similar new boat, and save those 10s of thousands of dollars for other things, but that's just me.
  9. M

    Cheap floor and foam replacement for weekend.

    Yup the cost of doing it right is not that much different from the cost of doing it wrong, and it doesn't set you up to break things. Of course you might run into more that needs doing.
  10. M

    Cheap floor and foam replacement for weekend.

    The bane of old fiberglass boats and the type of rehab they can require. Aluminum, if the hull is sound you can more or less always make the boat operational at a reasonable price. You might choose to go beyond that on a boat you're gonna keep (and a lot of us do) because you're still saving...
  11. M

    Cheap floor and foam replacement for weekend.

    That's not to say you can't use a partially completed project...but if you can't afford to replace floor and foam you don't rip it out - especially since the "cost" to do it right is far more time than money.
  12. M

    1987 Starcraft islander 190v?

    Other than being slightly more difficult to source props for "wrong" rotating engines I don't see where there would be any difference in a single-engine config.
  13. M

    1978 Islander 22 I/O

    If I remember correctly this was a factor in choosing the Bennet Sports for me. The extra couple of inches narrower on the transom really helped.
  14. M

    Cheap floor and foam replacement for weekend.

    There's not really a meaningful half-measure once you start digging in to things and ripping out foam.
  15. M

    1987 Starcraft islander 190v?

    How much clearance do you have currently? I think Watermann's Islander had been hacked to take a 20 - not in a manner I'd recommend but presumably it worked? I'd probably try to hunt down a 25 though.
  16. M

    1978 Islander 22 I/O

    Normally you are using the fish finder to find and evaluate spots to fish. Ideally even up on plane but for sure bubbling around at 2-5 mph to see if there are fish around.
  17. M

    1974 Chieftain 25 "Adventurer" Restoration

    Man you are way better about taking photos of stuff than I am... Is that 3 ft off of the deck for the railing? Comparing to some "standards": Elevated decks (on houses) require 36 in railings Elevated decks on children's playsets require 27 in up to 6 ft height, 33 in for over 6 ft height V5...
  18. M

    1965 Starcraft Arrow 14

    This is from having zero knowledge of that boat in particular. Fiberglass can be repairable to indistinguishable from new in some cases where aluminum is less so, but can also be susceptible to types of damage that aluminum is more robust against (e.g. abrasion). I come from the land of rocky...
  19. M

    Decisions

    How much use do you get out of your cuddy, and how would you use this one differently? Personally I'd probably do 1 cuddy and 1 open for a 2 boat quiver involving a cuddy.
  20. M

    1978 Islander 22 I/O

    By uploading it to this site in 2021😃
Top