Search results

  1. M

    Wood filler won't take on stain like it says it will...

    I am refinishing a dining room table that has two dime size gouges. I bought Minwax stain and also Minwax wood filler figuring it would be the best choice considering the same company makes the stain. It will not absorb stain well at all. I am using Minwax Colonial Maple and you can see these...
  2. M

    Restoring canvas mooring boat cover?

    My mooring cover is showing some age. For the most part it is in pretty good shape but the dye (blue) is begining to flake off in a powder form. When it rains, where the water drains off the boat it leaves a blue tint on the side of the boat. Is there a way to seal it or prevent the dye from...
  3. M

    Think my ESA died on my OMC 800

    When I go and press my micro switch to engage my ESA, nothing happens. Boat is almost 25 years old (1983 OMC 800 mechanical shift). I wonder if the ESA finally died?? I don't have no problem going in or out of gear. What are your thoughts on just driving it, leaving it alone? I keep my idle low...
  4. M

    I bet you can't stop after one....

    "http://flightsimx.archive.amnesia.com.au/" The key is getting it threw the window....90.012M...woooohoooooo!!
  5. M

    The wife lost her keys! Ford Key with the chip...not cheap!!

    So she loses her keys, no big deal I lose mine all the time but I do manage to find them. We never found hers. Go to wal-mart to have keys made. Guy tells me my Ford key has a chip in it and only a Ford dealer or Locksmith can make one. WTF? So I call Ford and its $85 for the key and $50 to copy...
  6. M

    Anyone ever changed the Spark Plugs on a Ford 5.4L Triton V8?

    My 03 Expedition has close to 75K on it and its probably a good time to change the plugs before they blow out of the heads. What a goofy design! Looks to be a nightmare to get to these but I'm up for the challenge. Any one done it before?
  7. M

    Stress cracks - trailer tires?

    I see cracks all the way around my trailer tires, not large cracks but small ones. The thread is in great shape, I guess its from having a load on them during storage? Maybe from sitting in the sun? Anyway, I'm debating whether to replace them or not. Hate to replace them as like I said, thread...
  8. M

    Mysterious beeping noise under the dash of a 1997 Stingray 180 RS

    Trying to help out another poster on the Sterndrive site. We are having trouble finding the cause of this beeping noise under the dash. Here what he has to say.... "I just purchased a w/ 3.L, 135 HP Mercruiser. I took it out for first time July 4th and when I launched and started the engine a...
  9. M

    Water in the bilge...from where? OMC 800

    I installed a new boot and it was sealed good, real good with 3M 5200. It doesn't leak. I ran the boat on muffs for a while and no leaks from anywhere (engine, hoses etc). I seem to always get a little water in the bilge, I figured my boot was getting old, which it was. I figured it was allowing...
  10. M

    OMC 800 shift assist and overstroke questions...

    I did some out drive work, after reinstallation the shifting is out or whack. I have not started the boat and checked it but have shifted it from the engine shift control box, the over stroke switch doesn't come close to contacting the plastic cam in full forward or reverse. I am curious, what...
  11. M

    OMC tru-course steering....

    When I took my drive off I marked my steering gears on the back or the IM and the upper. After putting the drive back on, I noticed that when I turn all the way to the right, the drive goes all the way to the bumper. When I turn all the way to the left, the drive does not go all the way to the...
  12. M

    Changed my impeller and now she runs cool...but....

    Damn water is getting into the upper unit gear lube while running on muffs (milky oil). This was happening before too. The old seals were wasted (water pump seals). I replaces all of them and the pump housing and impeller. How can this be? What is going on here? What would happen if I just...
  13. M

    Has anyone ever changed aout an OMC STRINGER impeller???

    I noticed my manual talks of a retaining ring that fits on the WP shaft for the shaft seal. The thing is, there wasn't one on the shaft when I took it apart? I have an 800 OMC and the shaft does have a groove for the retaining ring or snap ring. Should I just forget about it? I cannot find this...
  14. M

    Extra seals? Omc 800 impeller kit *pic*

    I took my impeller apart to put a new kit in. In the kit there are two extra o-rings but I have no idea where they go (see pic and arrows). I don't remember seeing these o-ring seals when I removed the old impeller and housing. Mine just had the large o-ring for the housing, an o-ring for inside...
  15. M

    Can some one help me with my balls? or rather nuts?

    Finally got my ball gear off the shaft in the intemediate. Had to torch it to bust it free. Got the new one on and used my impact wrench to tighten. I probably got it to about 60 ft/pounds and it calls for 90-100 ft/pounds. My compressor is too wimpy to tighten any more. I am having a hard time...
  16. M

    Solenoid question trim...OMC Stringer

    For some reason my trim will go down (motor up) but I am having a intermidant problem with the trim going up (motor down). Could my trim switch in my shifter be going bad? Is there an up solenoid and a down solenoid? I rebuilt the rams and reinstalled them. Trim motor working fine. If I turn the...
  17. M

    OMC 800 Impeller question....

    Have the boot off the back. Was wondering, can I raise the drive full tilt and remove the lower from the upper and move it aside so I can change the impeller? I looked and it looks like I have enough slack in the shift cable to disconnect the lower drive and move it over enough to get to the...
  18. M

    Abnormal Trailer Tire wear....

    I have an EZ Loader tandem trailer. The inner tread is taking a beating on all the tires. These tires are not that old. Outside tread in great shape. I checked the inflation and its fine. Is this normal? The weight of the boat is creating negative camber. Anyway to adjust this?
  19. M

    Stringer saddle? Steel/alluminum plate?

    My stringers have an area of dry rot around the lags. Just curious if someone makes a saddle that is of steel or alluminum that can be mounted to the stringer, then mount your motor mounts to this bolting them on? I was thinking you could use lags and epoxy the saddle to the good wood in the...
  20. M

    How many layers?

    Stringer repair. Plan on using 4 layers of fiberglass mat. Will it hold?
Top