Search results

  1. W

    Tacky Gelcoat

    Update: I re-coated the deck On Thursday of last week and let it dry. It seems to be a lot better. It is still cold here in NY so I am not going to walk on it for a few more days. Thank you everyone for their help.
  2. W

    Tacky Gelcoat

    Thank you all for the help. I am going to use Stresspoint's method this weekend. I will update when I am finished
  3. W

    Tacky Gelcoat

    The Gel Coat I used did not have any wax in it at all. So i should spray PVA over the entire deck I painted with Gel Coat.
  4. W

    Tacky Gelcoat

    Thank you for the feedback. I am going to try that.
  5. W

    Tacky Gelcoat

    I was looking for some gelcoat help. Prior to the winter I needed to replace the gas tanks in my center console. I figured, while the floor was up and out of the boat I would put a new coat of gelcoat on the deck. I sanded the surface & cleaned it with Acetone. Once everything was dry I applied...
  6. W

    Need Prop guy for Inboard - LI NY

    Thank you for the information. I will not use Bossler anymore but I will try the others.
  7. W

    Need Prop guy for Inboard - LI NY

    Thanks but I never heard of Google. Did that already but if you do not know the job they do you are just throwing darts at a dart board.
  8. W

    Need Prop guy for Inboard - LI NY

    Thank you but trying to find someone in Long Island.
  9. W

    Need Prop guy for Inboard - LI NY

    I am in need of prop reconditioning on my Inboard props. I live in Long Island NY and was wondering if anyone had a name of someone.
  10. W

    Raymarine Multi Function Display Flickering

    The screen cuts in and out. Almost like you are turning off the device but not really do that. I checked all the connections but I will look at the fuses tonight.
  11. W

    Raymarine Multi Function Display Flickering

    I have a Raymarine MFD with LightHouse II Release 19 software on it. This is on a Center Console with 200 Yamaha Outboard. When I have the GPS on at the dock and Motors running no issues with the display. Once I go out and give the boat power the display starts to flicker. I have put all the...
  12. W

    Mercrusier 350 MAG MPI - RPM issue under a load

    Final Update: I have to Thank Alldodge for sticking in with me through this very challenging issue. The boat is all fixed. The issue all the time was the cheap Chinese injectors I bought off of EBay. My dad always says, you buy cheap you get cheap. If I give anyone advise from my issue is...
  13. W

    Mercrusier 350 MAG MPI - RPM issue under a load

    Well I pulled the injectors today and found out that 2 of them were different and had larger spray holes. Of course those were the ones in the 2 cylinders where the plugs were fouled.
  14. W

    Mercrusier 350 MAG MPI - RPM issue under a load

    yes it seems so. I was going to get mine cleaned and flow balanced but they want 225 for all 8. I just ordered 8 new Bosch injectors for just a little bit more. It is also my understanding that Bosch actually makes the parts for Quicksilver
  15. W

    Mercrusier 350 MAG MPI - RPM issue under a load

    Update: I had a mechanic come down and run some tests. He hooked up the laptop and ran a few tests. No faults, no errors nothing. He did pull the spark plugs and saw that 1 & 8 are running reach. We also noticed that there might be leaky injectors. We turned the key on, pressure to 40psi...
  16. W

    Mercrusier 350 MAG MPI - RPM issue under a load

    4 blade 18 pitch. I can at least slowly get the boat on a plan. Just only to 3800 rpm’s
  17. W

    Mercrusier 350 MAG MPI - RPM issue under a load

    I guess I do not under stand the drive ratio question. I would think, even if the drive ratio was higher then 2:1 it would eventually get to rpm’s
  18. W

    Mercrusier 350 MAG MPI - RPM issue under a load

    Ok now back to my issue. Lol. Anyone feel I should pull the injectors and have them tested or possibly by new ones. The 1st mechanic said he cleaned them but not positive.
  19. W

    Mercrusier 350 MAG MPI - RPM issue under a load

    I feel like I have been hit by a bus several times and it keeps backing up over me. LOL. I am trying to get another mechanic down to put the software to it so I can get all the readouts and see what is going on. At least send it to you guys so you can tell me.
  20. W

    Mercrusier 350 MAG MPI - RPM issue under a load

    Then how would water get in there? Fuel is clean because I tested it This is a reman long block this year. I only put on the Intake manifold and the other miscellaneous items. I have been having this issue since May. i would think something else would pop up since then. I have had leak...
Top