Search results

  1. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    Ok i must have it hooked on the spring wrong. The lever dose slide from where it sits naturally to the right. So I need to figure out how to get it on there so that the flap is closed and it comes open when it heats up. I'll look again. Thanks.
  2. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    lou c i know you hear me lol
  3. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    Hey guys, quick update. The interwebs don't seem to know what the **** my problem is lol. I bought a kit from mikes carbs and rebuilt my carb. I was surprised how bad it was inside. I cleaned it all up and rebuilt it. The damn 4.3 omc purs like a kitten now. What I cant figure out is this...
  4. R

    Is there any hope???

    SHOTS FIRED!
  5. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    or mabey point me in the direction to the right rebuild kit.
  6. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    Any advise?
  7. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

  8. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

  9. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

  10. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    Hey Lou C. no auto parts store around here has a rebuild kit in stock so im looking on amazon and see new ones for 100 bucks. im trying to cheap as possible but the only ones i see when i type in my part number look a little different. the new ones hace a hose fitting on the front mine dose not...
  11. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    lou c have you had to do stringers in your boat? On mine the transoms good, the motor mounds are solid, but the deck is shot around the ski locker. All the surrounding floor is solid, but I assume once I get the motor right I'm going to be doing all the stringers.... although I hope to be able...
  12. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    Awesome info man thanks. That's weird about the motor. I know the hull is a 92, guess they replaced the motor with what they could find back in the day. So your saying I should take off the risers and make sure the flappers good? lol, I don't know why but I was trying to avoid that. Better...
  13. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    you were correct of course. now i know. thanks. for some reason i thought to hhold the trigger down.
  14. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    im like that guy neo from the matrix lol. but ya. now i get to replace the stringers lol
  15. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    Motor info
  16. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    Ok just an update. Not sure if it matters but the 4.3 is omc cobra. Not a mercrusier. Started runnen seafoam through the carb today and noticed a linkage on my carb was hitting the carb. Pried it away some and that helped it alot. I checked the cap and rotor and all is well. I still couldn't...
  17. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    thanks for the info on the throttle ill check it tommarow. it seems to me the choke is working as you described. im going to run some sea foam through it and see what happens
  18. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    I did replace the bearings on the upper unit. all seems to be ok there now. I took the fuel sender off and drained the tank. I got all the junk out and have fresh fuel. now it idles high for a about 3 mins and then idles down and dies. i got my fuel seporator today and am going to install...
  19. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    so new filter and see if fuel pumps going out.
  20. R

    Need advise on bringing a 92 beretta succsess 200 back to life.

    Almost forgot. I found this guy tapped up dangling behind my motor. Any body know what it is? Thanks. I cant find an oil pressure switch to save my life.
Top