Search results

  1. B

    Removing Carpet Glue

    I just didn a tecarpet on my bass cat and some of the glue has come thru the carpet any ideas to get it out of the carpet?
  2. B

    1979 70 hp choke issues

    Carbs have been cleaned and put back but it leaks fuel now from I’m assuming the over flow valve and the little one in the front when priming is this the correct way for them to work? Or did I mess something up I was confused a minute by the two metal pieces one connect to the floats and then...
  3. B

    1979 70 hp choke issues

    It’s not that o want to find out I’m just wondering if this has been my issue all along
  4. B

    1979 70 hp choke issues

    Will it run with no trigger wire?
  5. B

    1979 70 hp choke issues

    So it looks like I’m the second one but the wire that I have that is unhooked is coming from the trigger not a kill switch? Also too apart the carbs and cleaned them and put new gaskets but now gas pumps out of the jet on the boot on part of the carbs is this normal or did something not get...
  6. B

    1979 70 hp choke issues

    Also where does the wire go that should be connected to the switch go?
  7. B

    1979 70 hp choke issues

    No worries I’m new to all this so didn’t want to take apart anything I didn’t have too
  8. B

    1979 70 hp choke issues

    This might sound dumb but how do you get the front frame off I have gotten the first plastic cover off but can’t seem to get to the carbs behind the frame
  9. B

    1979 70 hp choke issues

    No the nut that would be the kill switch the wire has been removed. I can take photos when I get back home. When I bought it I was told that someone tried to bypass the kill switch at the box. And they took out the key switch from the controller so the kill switch in the controls is hooked to...
  10. B

    1979 70 hp choke issues

    Everything actually looks really good right down to the paint someone has already pulled the kill switch at the switch box but I have no clue where it goes becuase it looks like they pulled the whole wire not just disconnected it
  11. B

    1979 70 hp choke issues

    I just got this 1979 merc 79 hp it doesn’t have a key installed in it at this point and then kill switch is also off. But I guess my question is will my motor start and run if hooking cables straight to the starter just to see if it will run or do I need an ignition switch and kill switch...
  12. B

    Harness issues

    So I just hard wired it in but I’m not sure why I’d doesn’t try to turn over I have 13 V at the battery wire then nothing on the sylanoid and nothing when I turn the key?
  13. B

    Harness issues

    So what I’m understanding is I can cut the end of the new controls off and run them directly to motor bus bars and will run a seperate set of battery wires to a ground and starrier cylanoid thus bypassing a wireing harness all togather?
  14. B

    Harness issues

    So what I’m understanding is the power line in the new pigtaile is enough to run gauges but I will need a seperate line to the battery for motor starting? I plan on running trolling motor and other things off a seperate deep cell battery. The current gauges are running of a direct connection to...
  15. B

    Harness issues

    The max rules was were I was getting most of my info as to splicing an extra power line into existing harness is there a draw back to just hard wireing new controls and running battery cables thru that whole where the plug would have Ben and putting a water proof stopper plug in there?
  16. B

    Harness issues

    Yea harness is shot. That’s why the question of just hard wireing it in and it doesn’t have a switch box I think it’s just two bus bar style connections on the starboard side next to where the harness comes in like maybe 7 wires
  17. B

    Harness issues

    My understanding was that it was a plug and play kind of thing
  18. B

    Harness issues

    So I bought a new control that is an 8 plug pin that supposedly is the replacement for this model to just plug and plug if I’m understanding correctly. Here is the link to the control I bought...
  19. B

    Harness issues

    I guess my confusion is in the diagram that’s showing a power line going thru the harness. I think I’m miss understanding where the battery cables go in the cowel becuase the only opening I have I believe is thru the harness plug
  20. B

    Harness issues

    A seperate set of battery wires? does the power normally go thru the harness? And then split inside the cowel?
Top