Search results

  1. Z

    New exhaust manifold advice

    I had a professional welder give it a try and he said that the impurities that have been absorbed into the casting were too much. He could hardly even get filler rod to adhere. I am told he is good, but I do not know that for a fact.
  2. Z

    New exhaust manifold advice

    The only part that is currently showing a problem is my starboard manifold. The area around the O2 sensor is weak. I have found one on ebay, but it is used and pricy. I am debating on whether or not to order it. I don't know if the other exhaust parts are also going bad or if this paticular part...
  3. Z

    New exhaust manifold advice

    I bought the boat used and had no idea what I was getting ont wth a cat engine. This boat has around 200 hours and runs great. I talked to Raylar and they sent me to Custom marine. I have sent them pictures of my exhaust system and I am hoping that they can help but I have not heard back. I am...
  4. Z

    New exhaust manifold advice

    Those manifolds seem to be for a smaller V8 than the 8.1. The part numbers don't match up. Would you try to stick with the catalyzed exaust or would you try to change to non catalyzed? I am finding the manifold for sale, but out of stock. The price for the manifolds only is about $4300 per side...
  5. Z

    Spray of water from exhaust manifold above O2 sensor

    Update. I had someone look at it and they think the manifolds are coming to the end of their life. Now I need to find some replacements. :(
  6. Z

    New exhaust manifold advice

    I have a 2012 Volvo Penta 8.1 GiC-Q 400HP catalyzed engine. My manifolds are coming to the end of their life. The parts for the manifolds alone is over $4000 per side. That doesn't account for the elbow or anything else on exaust side. The manifolds are impossible to find so I am looking for a...
  7. Z

    Spray of water from exhaust manifold above O2 sensor

    There does not seem to be any exhaust gas coming out. I had the manifolds off last year and they were very clean. There was a very slight layer of rust that could be removed with a paper towel. I would call it a dusting of rust. No flakes. I am hoping that this is just a defect durning the...
  8. Z

    Spray of water from exhaust manifold above O2 sensor

    It's heavy so not aluminum. There is not much rust on the inside of the manifold. Any chance a welder can seal it?
  9. Z

    Spray of water from exhaust manifold above O2 sensor

    I got busy after posting this orginally. I have uploaded the video and posted it to youtube. Video of spray. This spray is actually coming from the starboard exaust manifold just above the precatlyst O2 sensor. Any idea what is going on or if it is repairable? Thank you for you help!
  10. Z

    Spray of water from exhaust manifold above O2 sensor

    I have a 2012 Volvo Penta 8.1 GXCi-Q with the O2 sensors. There is a small spray of water coming from above the O2 sensor on the port side. Any ideas what the problem could be? I have attached a video in the picture. I appreciate any help.
  11. Z

    Leak from transome

    I did pull the drive over the winter. Bellows are not leaking. I am guessing I am getting about 5 gallons an hour from that leak.
  12. Z

    Leak from transome

    I have a 2012 Cobalt 276 with a Volvo dpsb outdrive. I am getting a substantial leak coming from what appears to be below the y exhaust port. I have attached a picture but also have video of the leak if that helps. Do you think this needs a transom seal? Is there a temporary fix for this? I am...
  13. Z

    Engine problems while on vacation

    So it looks like the paint from the fuel pump assembly is coming off and clogging the fuel injectors. I have cleaned the fuel rail, lines and injectors as well as removed the paint from the assembly. I can see the paint chips in the fuel pressure regulator screen. UHGGG!!!
  14. Z

    Engine problems while on vacation

    I will do that in the morning. I am also going to test the pressure in the fuel rail.
  15. Z

    Engine problems while on vacation

    Half the fuel is a month old, the other half is fresh.
  16. Z

    Engine problems while on vacation

    I have a 2012 VP 8.1. We have had all kind of problems on vacation. I had a lack of power and check engine lights. I could not find a mechanic within 200 miles that could read the codes. I ordered a Rinda code reader and received it today. We found yesterday that 2 injectors were mostly clogged...
  17. Z

    2012 8.1 #6 cylinder missing

    Thank you both. I found the problem. It was a bad plug wire. I believe the malfunctioning coil caused the wire to fail. We Will Have A Boat On Vacation. I appreciate your help!!!!!!!
  18. Z

    2012 8.1 #6 cylinder missing

    The spark plugs look good. No fouling. I will check the plug wires. I have a new coil wiring harness. The mechanic thought the problem was electrical and possible in the harness. If that does not work, I am trying a compression test next. I really appreciate your help.
  19. Z

    2012 8.1 #6 cylinder missing

    While my family was on vacation, I started feeling a mis. I could feel a shake at 1000-1200 rpms. I took the boat to a Volvo Certified mechanic. He hooked it up to a computer and said that #6 cylinder was missing. He swapped spark plugs and that had no effect. He checked for spark and said there...
  20. Z

    Removal of broken head bolt

    Is there an easy way to remove a broken head bolt on a 2012 VP 8.1? This is a one of the head bolts above the exaust port. I noticed water leaking from behind the exaust manifold and found that one the head bolts broke off. The water was coming from behind the bolt head. Is there any shortcut to...
Top