Search results

  1. C

    Hook up kill switch

    I just installed a 1970 60 HP Evinrude (Model 60073)with electric shift on my boat. The kill switch is mounted on the dash. What wire in the control box would I have to splice into?<br />Thanks,<br />Copus
  2. C

    60HP Evinrude ignition problem

    I just picked up a 1970 Evinrude Triumph 60HP, Model 60073D, Ser#J13012.When I first start out motor runs great, right up to 5500 RPM.After about 10 minutes as the motor gets hotter, it starts to buck and miss. This gets progressively<br />worst until I can't even get up on plane.<br />I pulled...
  3. C

    Correct sparkplugs

    I just picked up a 1970 60HP Evinrude on Ebay, Model 60073.It has NGK B7HS plugs in it.Are these correct for this engine or should I be using a Champion plug?<br />Thanks
  4. C

    Overheating problem Johnson 35HP 1982

    Engine runs great now, but after running at 3500 rpm for about 10 minutes it slowly heats up and dies. So far I have replaced the impeller,new powerhead base gasket, new head gasket. I dropped the lower unit and checked the water inlet tube for a restriction. I removed the thermostat. The block...
  5. C

    1982 35HP Johnson overheating

    Model J35RCND. I have replaced the waterpump impeller and housing. New thermostat. When running on the muffs, the exhaust cover stays cool but the block and heads are to hot to touch. I have water coming from the telltale and both exhaust ports and the prop. I removed the thermostat and no...
  6. C

    noisy lifters

    My buddy and I just finished installing a 351 ford long block in his boat.Motor runs good but a few of the lifters are loud. They are not the adjustable type( pedestal mounted).What would be the correct way to adjust these?
  7. C

    35HP Johnson idles rough

    1982 Johnson 35hp model J35RCND manual start.<br />Engine idles rough when running in a barrel. So far I have changed water pump, removed carb and cleaned, replaced thermostat,checked and set sync and link,new sparkplugs. When running fuel bulb is hard (new tank, bulb and line).Compression is<br...
Top