Search results

  1. K

    Help with my vessel view please!

    Hello I need some help please. So the most important question I have is can I hook up vessel view mobile WITHOUT using a terminator resistor cap on the harness? By using it I mean just turning the key on and checking the stats and not running it. Anyways so I just picked up this boat with an...
  2. K

    Gas leaking out of one carb?

    It idles and runs great!!!! Thanks guys for all your help. All it needed was a float height adjustment. Who ever said that earlier you were right!!
  3. K

    Gas leaking out of one carb?

    I adjusted the float height and it’s not leaking now. Hopefully it’ll idle.
  4. K

    Gas leaking out of one carb?

    So now I put both the old and new needle in and sprayed some pb blaster on the needle and blew some compressed air into the intake of the carb and I could hear and see the bubbles coming out from around the needle. The needles aren’t seating correctly.
  5. K

    Gas leaking out of one carb?

    So I bought some new float needles and it still F***** leaks both with the new and old I’m gonna lose it.
  6. K

    Gas leaking out of one carb?

    Took the top carb off and found this debris in one of the jets plugging the hole. Would this cause it to overflow?
  7. K

    Gas leaking out of one carb?

    I just did the same thing to the top carb and I can very slightly hear a tiny bit of air coming out. Not much at all tho. When I pushed the needle down damn near all of the noise stopped. Not sure if a little bit is acceptable or none is
  8. K

    Gas leaking out of one carb?

    So I just blew some compressed air into the intake hose and moved the float up and down to see if the needle was seating and it was when I pushed the needle down I stopped hearing the air so
  9. K

    Gas leaking out of one carb?

    No I just cleaned everything. The needle looked fine. How do I check float height?
  10. K

    Gas leaking out of one carb?

    So I put the carb back in. Now it’s leaking gas out of the top carb and still won’t idle. Kinda lost.
  11. K

    Gas leaking out of one carb?

    Hey so when I pump the primer bulb gas is leaking out of only one carb. I took the carb off and took the float bowl out and cleaned it. Didn’t look that dirty. Everything looked normal but I’ve also only cleaned carbs a handful of times. So we will have to see what happens when I put it back on...
  12. K

    Power trim not working just clicks.

    I just put a $50 amazon motor in it and it works good now.
  13. K

    Power trim not working just clicks.

    Specifically what do you mean check to see if it’s open?
  14. K

    Power trim not working just clicks.

    Not that I’m aware of. I’m in Wisconsin. Bought it from a guy in Illinois
  15. K

    Power trim not working just clicks.

    Which pictures? And what does that mean?
  16. K

    Power trim not working just clicks.

  17. K

    Power trim not working just clicks.

    And what is this part?
  18. K

    Power trim not working just clicks.

    I’m gonna take a guess and say the motor isn’t supposed to look like this? lol
  19. K

    Part of oil injection pump is broken

    I think the oil pump is shot in general. Take a look at this video. I’m pretty sure that thing is supposed to be constantly spinning. Don’t worry I had it running on 50:1. I bypassed the pump and did this. I can just loop the hose back into the pump like in this photo right?
  20. K

    Part of oil injection pump is broken

    On this Mariner 40hp oil injected motor part of the oil pump case is broken off and exposed and it leaks some oil out of it. Is this a problem or is it fine like this? I’m definitely not dropping 300 bucks on a new one. I’ll delete the oil injection at that point.
Top