Search results

  1. vorsprung

    Bog/Stall/Die on Throttle

    Yup, used a jet cleaning tool to make sure there was nothing gummed up. Carb floats were all checked to make sure they were level (both directions). The motor wasn't working the greatest when I got it. Idled terribly and sometimes it would take a few times to start it. I also wanted to make...
  2. vorsprung

    Bog/Stall/Die on Throttle

    -Carbs were just a place to start, I did check with a flashlight and a ruler to make sure the bowls were not bowed. I replaced the throttle body gaskets because I took everything pretty much off the engine this past winter, they were pretty smashed down so I put in new ones to prevent any...
  3. vorsprung

    Bog/Stall/Die on Throttle

    Nope, have to feather it again or it dies.
  4. vorsprung

    Bog/Stall/Die on Throttle

    Yeah, I rebuilt the carbs and then pulled the throttle bodies off, cleaned them out and replaced both gaskets. Then re-attached the carbs onto the throttle bodies. #1 is a throttle body, carbs you can see, gasket is #64.
  5. vorsprung

    Bog/Stall/Die on Throttle

    I have a 2000 Johnson J150PLSSC that bogs/stalls/dies at holeshot, I pretty much have to feather it past 2000 rpm and then it runs like a banshee at WOT. I've noticed a pattern though with this issue, it happens after the engine is fully warmed up, not when it's cool. It still doesn't idle the...
  6. vorsprung

    Fuel Tank Access

    Got the fuel tank access panel off. Magnets and metal detectors were fairly useless, just had to keep feeling around. Unfortunately, it was a wasted effort. There is no ASV in my 2000, just a straight open elbow connector.
  7. vorsprung

    Fuel Tank Access

    Unfortunately not, aluminum screws.
  8. vorsprung

    Fuel Tank Access

    Just following the advice of others, it was suggested to examine/replace the Anti Siphon Valve on my fuel tank as a possible root cause for my fuel starvation issue on my 2000 Larson 186SEi /w Johnson 150 O/B. So I got to work taking the screws out on the access panel, so far I got all the...
  9. vorsprung

    1999 SEI186 Fuel Tank and Fuel Sender

    Does anyone have a map of where the cover screws are? I believe I have found all the outside ones but I cannot lift the cover off, seems like there are some in the middle. I have a 2000 186 SEi
Top