Search results

  1. A

    Help with RUN/OFF switch on Commander 3000 throttle control

    So I got an I/O engine on my boat. My boat had a switch with the 2 purple wires. Unfortunately I got the one with a black wire and a black and yellow stripe wire. The purple one was there for show and did not work nor was it connected. I am assuming I should make a cut in the purple wire and...
  2. A

    Kill switch replacement

    I'm going to need help with lifting the boat I don't own any of that equipment to do so.
  3. A

    Kill switch replacement

    So you are saying, that purple wire, needs to be cut and spliced, then in one side put it through one side of the purple wire to the switch , then the other side if I had the proper switch okay I get it now
  4. A

    Kill switch replacement

    So I have an inboard/outboard or stern drive, it is a sea ray 180 bowrider. I can't find the second purple wire that related to the kill switch. I bought the run/off switch but it was the black ground and the black and yellow. I thought it would do the same thing. I now need to replace a bunk...
  5. A

    Kill switch replacement

    Yes it's I/o
  6. A

    Kill switch replacement

    Thanks
  7. A

    Kill switch replacement

    There is no black and yellow wire indignation switch here so I didn't know where to connect the second switch
  8. A

    Kill switch replacement

    Yes I am replacing the lanyard switch. I don't know where the second wire connects too. Is it the yellow red one or purple one? That is all I need to accomplish because it is back on
  9. A

    Kill switch replacement

    Should I wire it into the yellow n red somehow or the purple ignition one?
  10. A

    Kill switch replacement

    So the kill switch I'm replacing. I'm trying to figure out where would I put the actual black and yellow wire cuz I do not see another one with the other boat wires? Additionally, the original kill switch was purple wires with a purple and white wire as well.
  11. A

    Generic Boat Wiring information - Updated Verified

  12. A

    Generic Boat Wiring information - Updated Verified

    So I have a new kill switch and it haves black for ground, and black/yellow for I'm guessing that goes to an ignition. My question is my old one is purple and purple/white what do I do? Is the black and yellow one go to the purple one and I know black goes to ground
Top