Search results

  1. J

    1993 Evinrude 90hp V4 overheat

    My motor overheats only when run wide open. I've replaced water pump, thermostats, flow restrictors. Still overheats but only when run wide open. I talked to a mechanic who thinks the problem is electrical, not water flow. He said the timer might need replaced. Thanks for any thoughts...
  2. J

    1993 Evinrude V4 overheat

    I have been having an overheat problem with my motor. It started overheating only when wide open. I replaced water pump and thermostats. Still overheated, but only at full throttle. I just replaced water-flow restrictors inside the head. Cranked the motor up with muffs on. It ran fine for a...
  3. J

    wood filler

    What is a good filler to use? I've just replaced part of my floor. There are gaps between areas of plywood that I want to fill before I glass over the plywood. I tried to fill with epoxy but the liquid drips through before it hardens.<br /><br />Thanks
  4. J

    1993, 17' Sunbird interior redo

    I'm restoring the interior of a 17' Sunbird. I started with the upholstery. All of the wood on the back side of the cushions and the side rails was rotten. I replaced the wood with plastic. It took 2, 4x8 sheets of pvc board. Neat stuff easy to work with, won't rot, but it's expensive...
  5. J

    polyester resin that didn't harden

    What can be done with polyester resin that didn't harden after 24 hours. I mixed the resin with pigment and smoothed out the ski locker area in my bowrider. I mixed the hardener according to directions. 24 hours later it is still tacky.<br /><br />Thanks
  6. J

    1993 evinrude 90 hp overheat

    My motor only overheats when running wide-open. I've replaced waterpump and thermostats. From information I've gotten, I need to replace water flow jackets inside the head. I've never pulled heads before. Any tips or helpful information?<br /><br />Thanks
  7. J

    Evinrude electrical short

    I have a 1993 Evinrude V4 90 hp that has had a few problems. I just replaced the voltage regulator/rectifier and installed a temp guage. Now it is blowing fuses when I turn the ignition key. Any ideas where my short could be?<br /><br />Thanks
Top