Search results

  1. B

    140hp miss

    My 89 140 hp Evinrude has an intermittant miss throughout the entire rpm range. most noticable at idle and when taking off and at wot, all though it does not all ways happen. The carbs are clean and rebuit, new spark plugs (QL77JC4). Is it possible that it is a coil or powerpack or under the...
  2. B

    140 looper idle problem

    I have a 1989 Evinrude 140, the only problem I seam to have is a low idle speed. I did the link and sync asper the service manual. there seams to be no idle speed adjustment for this modle. It idle around 450 to 500 rpm wear it stall sometimes. Am I doing something wrong in the link and sync...
  3. B

    spark plugs

    whate is the diffence between a QL77JC4 and QL78YC. I have a 1989 Evinrude 140 hp. What is the proper plug? I have had to differnt answers from two different supplers? Thanks
  4. B

    140 hp won't turn off

    I have a 1989 140 Evinrude that will not turn off with the key or kill switch. I have tested the key switch and kill switch asper the manual and they test out fine. all the connection in the motor seem good and clean. Does this mean the power pack needs to be replaced ????
  5. B

    Rigging a 140 HP

    Has anyone rigged a Stingray 551 ZP with a 140 Evinrude? How high do you rig the motor with the notched transom? I know on a normal v hull it is normally cavitation flush with the bottom of the hull. Do you rig this one higher than normal?
  6. B

    551 ZP o/b rigging

    How high do you put the motor on the transom of this boat?
  7. B

    140 Hp drive shaft splines

    I have found out that there are different drive shaft part numbers for different modle years of the 140 hp V4. My motor is a CE140TLCEB. Are all the splines the same or did they have different splines for different years of the 140Hp drive shaft.
  8. B

    Gearcase back fit

    I am looking to buy a 1989 140 Evinrude Mod # CE140TLCEB with no gear case. is it posible to use a lower unit of of a early to mid 80's 140 hp modle ?
Top