Search results

  1. M

    Suzuki DF140 fuel injector issue code 4-3

    This makes sense, that a sensor tells it when to fire injectors. Hmmm wish i had a factory manual for this engine.
  2. M

    5.0 Ford MPI surging at idle and at 3500 rpm

    Yes fuel pressure is good, even when surging. I will check for vacuum leaks. Ill get back into the boat in the next couple days, once the new part arrives.
  3. M

    Suzuki DF140 fuel injector issue code 4-3

    Have a 2006 DF140 that is not running on the #3 cylinder. Has perfect compression and spark on all 4. Battery terminals are clean. Swapped injectors between different cylinders and the problem does NOT follow. Have proper resistance on the wires between #3 injector plug and the computer...
  4. M

    5.0 Ford MPI surging at idle and at 3500 rpm

    Thanks for the response! I do not have the correct style connector to pull diagnostic data from this engine, unfortunately. Its different than any other VP I have encountered. I did do a thorough check of connections/plugs, and battery terminals/main power. I do have good fuel pressure and...
  5. M

    5.0 Ford MPI surging at idle and at 3500 rpm

    When cold, the engine starts and runs good at first. After warmed up the idle surges very slightly, just enough to see the tach move a little and you can hear it. Feels smooth getting on plane, but after cruising at 3500 or so for a few minutes it will surge more violently. If I accelerate...
  6. M

    1984 14ft Bluefin project fishing boat

    I picked up this old 14ft Bluefin vhull jon boat for a great deal. Already have a sweet little electric start Johnson 15hp to go on it sitting in my garage. Will be getting started soon on the project. Heres how it looked when i first got it...
  7. M

    Honda BF225 codes?

    03 bf225 Runs smooth at idle and but wont get over 4000 rpms. Recent major service, high pressure fuel pump and filter replaced with no change in symptoms. Ive found its easy enough to jump the service connector to flash any codes the ecu has stored, but the problem is I cant find a list of...
  8. M

    2001 Johnson 15hp 2 stroke specs/advice

    Just realized I should have posted this in the nonrepair section, If a MOD wants to move it, go right ahead! thanks! Just picked up this nice little motor, its a 15hp 2 stroke electric or pull start 15" shaft with very low freshwater hours. When i was a kid I had great experience with a late...
  9. M

    Offshore in the 17 footer

    Spent a lot of time and money getting my little 17ft Anacapri cc back to new condition, and just recently was able to get offshore for the first time. Picked up some dolphin on the first trip (and lost a nice cobia at the boat). Second trip out, same week, my buddy got this 47lb wahoo. We...
  10. M

    Help me pick a prop 130hp Yamaha

    Ive been working on a project boat for the last 5 months.... it finally hit the water today :) The boat is a 17' Anacapri with a 2000 130hp yamaha. The first prop i had to try was a 21p standard yamaha ss prop (the black painted one with the straight trailing edge blades). As I suspected, it...
  11. M

    130 Yamaha WOT sweet spot?

    Im putting a 2001 yamaha 130hp V4 on my 17' Anacapri cc. What is the ideal wot rpm to turn this motor? In my experience, most of the time you want to prop for the high end of the rpm range, which I see is listed at 5000-6000. But I have been told that the v4s only like to run about 5500...
  12. M

    covering a boat with a T-top?

    i have a 21' cc with a ttop, and at my new house the only place to put it is directly under a big oak tree. needless to say, the boat looks terrible after only a few weeks. ive been going out and washing the leaves and dirt off every couple days, but thats not cutting it. i cant afford to get...
  13. M

    honda bf225 oil alarm?

    is there a way to reset the oil alarm on hondas? just did an oil change, it is full and the oil alarm wont go away. the oil pump is definitely pumping oil... it filled the filter immediately upon start up. thanks!
  14. M

    Causes of prop slip?

    I have a prop slip of 16% and i am wondering why it would be so high? My boat is a 21' Offshore... it has a 8' beam, fairly deep V, center console, not sure of weight but probably in the 3000lb area. The motor is a 200 ocean pro. WOT is 5700rpms at 43.5mph on gps with a Powertech 17p...
  15. M

    help with 200 ocean pro

    ive got a 200hp 98 evinrude ocean pro that doesnt want to run all the sudden. was running perfect all day, then on the way in it stalled repeatedly and then eventually wouldnt run for more than a few seconds. checked the water sep and it was FULL of dirty water. today i replaced the water...
  16. M

    4 blade to 3 blade advice

    i purchased a boat that has the wrong prop on it. its a 4 blade 21 pitch stainless prop. with a light load the boat only hit 4600 rpms trimmed out. i want to purchase a 3 blade SS prop for it and im debating on whether i should get a 19p or a 17p. what do you guys think?
  17. M

    Water in hull Carolina Skiff

    I have a friend with a 16 ft carolina skiff classic (98 model i believe) that has water in the hull. There is no hull drain anywhere so we drilled a hole in the bilge area. Very little water came out, but its obvious the foam is wet and the boat is very heavy. What can you do in this...
  18. M

    porpoising/smart tabs questions

    my boat is a 16ft semi-v that weighs a little over 700lbs dry w/o the 70 yamaha motor. it gets high 30s at 5700 with the factory 17p alum yamaha prop in ideal conditions and very light load, but i feel that i could get more out of it if it didnt porpoise so easily. the boat has pretty good...
  19. M

    what to do with this prop?

    sorry if this is not the right forum for this... i have a prop that was given to me and it has been sitting around collecting dust. its a Solas 13 1/4 x 17 stainless prop, that i was told was installed on a boat for about 30 minutes and taken off. so of course it is perfect and looks brand...
  20. M

    s150 txrw problems

    so its a 98 150 carb 2 stroke. idles just fine, and runs normal up until about 2000rpms. then as you advance the throttle slowly it begins a sort of surging, in a somewhat regular pattern. if you keep advancing the throttle beyond this, the surging stops but the engine bogs and wont increase...
Top