105 chrysler found today

[newportrider]

Okay, its not running, has a hole in one cylinder, and is seized up. Otherwise its almost complete, missing the prop. It is a 105HP Magnapower Ignition mod:1057BE SER1126 Made in Sarnia Ont. It has the dist, starter and coil powerpack? What year would it be?TIA
Larry

 

[eurolarva]

Re: 105 chrysler found today

1973. Gonna be tough finding cylinder parts for that motor. Good luck

 

[newportrider]

Re: 105 chrysler found today

No Im not fixing it up, but if someone wants anything I will part it out.

 

[odie]

Re: 105 chrysler found today

does it have the carb air filters?

 

[odie]

Re: 105 chrysler found today

The starter on mine seems to be dying, or maybe just a little gummed up. When I turn the key it engages the flywheel but seems to just slip as the starter spins internally. If I hit the key a second or third time the starter quits slipping and turn the motor over real well.

That all seems just real bizzare. I think it needs closer evaluation.

There is a loose wire. Pictures I have seen show a sensor of some type on the back/head. I'm guessing a cylinder head temp sensor. It's the orange wire I think. Comes from behine the module looking thing on the starboard / alternator side.

The engine seems to run fine as is though.

 

[newportrider]

Re: 105 chrysler found today

Odie, no it doesnt have the carb filtres, I pulled it apart today, the starter still works! So if anybody want's any parts or pieces let me know, it's awful heavy to move around. Hopefully I will get a lokk at the crank tomorrow eve.
Larry