115 crossflow 93' johnson, help, piston kit #

[MOETOROLA]

Found cylinder one lost a ring and chewed it up.<br />The cylinder walls still look ok though, may just have to have it honed. I need to know what the kit number is for the piston and rings, for both standard and next oversize piston would be?<br /><br />Also can i mix wesco pistons with OMC pistons. Other 3 cylinders are in good shape.

 

[Dhadley]

Re: 115 crossflow 93' johnson, help, piston kit #

Youll know what has to be bored once the machine shop measures it. It can look good but be too far out of round. It probably is with all the additional combustion heat that was in there.<br /><br />If it does clean up within spec you can use Wiseco and OE. The Wiseco piston is the 3173 series. Make sure its the 3173 not the 3073 or 3013 series.