1956 30 hp big twin fuel line routing

[BlackoutBill21]

So I finally found a pressure tank that I can use for these motors and every time I search this I get the “how to convert” topic

ive asked this before on another motor but this one has to two barbs coming out of the intake plate. Top one and bottom

which goes to the air hose pumping crank case pressure to the tank

and which goes to the upper solenoid thing

 

[BlackoutBill21]

Never mind found it

have to search intake manifold instead of fuel lines

the bottom one goes to the air side of the fitting
the top one to the vacuum cut off