1960 Evinrude Lark 40 hp wiring harness connect

[thord]

I am rebuilding my harness and it seems the connector is molded and not reusable. If so, what have others done for replacing the connector?

Here is a link to a couple photos. http://www.flickr.com/photos/26174388@N06/

Thanks
Joseph

 

[tx1961whaler]

Re: 1960 Evinrude Lark 40 hp wiring harness connect

I don't use one.
I just wire everything up directly using a 18ga multi-conductor cable. I bring up power and ground with a separate (fused) 16 ga wire to a terminal block connecting to the ignition switch and accessories..

1 wire for starter solenoid
1 wire for electric choke
2 kill wires

 

[thord]

Re: 1960 Evinrude Lark 40 hp wiring harness connect

thanks! any others?

 

[tx1961whaler]

Re: 1960 Evinrude Lark 40 hp wiring harness connect

http://www.nymarine.ca/wiringharness.htm

 

[Willyclay]

Re: 1960 Evinrude Lark 40 hp wiring harness connect

 

[thord]

Re: 1960 Evinrude Lark 40 hp wiring harness connect

http://www.nymarine.ca/wiringharness.htm

Thanks Whaler, I did call this guy, but he does not make the internal harness. Since mine is shot, I am not going to be able to use the fancy molded connector. Do you know of anywhere to get the internal part?

 

[thord]

Re: 1960 Evinrude Lark 40 hp wiring harness connect

Thanks Willy!