1967-69 Model Merc 110

[Kuvats]

Hello
I need a fuel connector for the afore mentioned engine i know its the smaller connector but i cant seem to find the right one for sure Does anyone know the exact size I have found as many as 4 varieties Just need to find out what one is correct. I just had it worked on and the gentleman had the right connector but didnt have a spare. the part number on his was 30635. Any help would be appreciated.
thanks
george

 

[d.boat]

Re: 1967-69 Model Merc 110

Get ready for sticker shock on these old, smaller connecters. They are surprisingly expensive. I haven't found an alternative, except maybe if you luck out in a local boat shop "bone yard" or someone who has one lying around. Maybe ebay.

But I do know you can find one (at least last time I needed one) at www.oldmercs.com. Search through their inventory in the year range of your motor and they will list fuel connectors, clearly described as the smaller type for older, small engines.

 

[Kuvats]

Re: 1967-69 Model Merc 110

Hello
Thanks for the info i have been othat site and all they say is Small 1/4 turn fuel connector that plugs into 1961 6HP and 1962 thru 1971 3.9 to 9.8 HP models. I need to know what the size of a small one is I have found others in 3/8 ths 5/8th and one other cant remember the size right now Anyone know the right size ?
george

 

[green4themoney]

Re: 1967-69 Model Merc 110

this connector will fit your motor, i just ordered one as well for my 1970 9.8 and it fits fine, this is a good site, even though they are a tad pricey

 

[d.boat]

Re: 1967-69 Model Merc 110

Hello
Thanks for the info i have been othat site and all they say is Small 1/4 turn fuel connector that plugs into 1961 6HP and 1962 thru 1971 3.9 to 9.8 HP models. I need to know what the size of a small one is I have found others in 3/8 ths 5/8th and one other cant remember the size right now Anyone know the right size ?
george

Well you said your merc 110 is 1967 or 68, and the product description says it fits 62-71. What's the question? In case you don't know, the merc 110 is 9.8 hp, so it fits right in there. There are only two sizes that I am familar with: "regular"/current standard size and small, you need the small one, just like the oldmercs site says.

If you're still uncomfortable (I dont blame you, $50 is a lot for such a minor part!), just call the company (I think it's called east coast marine?), they are good.