1971 1350 Video Rebuilt

[OperativeK]

http://opk.gotdns.org/Boat_0002.wmv <br /><br />Replaced some pistons, one cylindar bored, all rings and lots of luck. All parts from Clams and lots of good info.<br /><br />Thanks to all that helped.

 

[dakk1]

Re: 1971 1350 Video Rebuilt

Good to hear of a positive outcome. If you don't mind my asking, what does it cost to have one cylinder bored in Tx?<br /><br />Dave..

 

[OperativeK]

Re: 1971 1350 Video Rebuilt

$35

 

[Yepblaze]

Re: 1971 1350 Video Rebuilt

Really sounded nice at first.<br /><br />Sounded a bit like it was dropping some cyl towards the end of the video. Guess you'll know when you get it on the water.

 

[timmathis]

Re: 1971 1350 Video Rebuilt

Let's see it on the water!

 

[Clams Canino]

Re: 1971 1350 Video Rebuilt

Ya, when it's on the water redo the idle needles trolling in gear. 3/4 turn out from stumble is usually pretty good.<br /><br />-W

 

[OperativeK]

Re: 1971 1350 Video Rebuilt

Will do.

 

[OperativeK]

Re: 1971 1350 Video Rebuilt

Ok finally got around to it so here they are:<br /> http://opk.gotdns.org/boatlaunch.wmv <br /> http://opk.gotdns.org/boatonwater1.wmv <br /> http://opk.gotdns.org/boatonwater2.wmv <br /><br />Some are kinda large for 56k! Warning. I wouldn't DL unless you have cable or dsl.

 

[PuddleJumper]

Re: 1971 1350 Video Rebuilt

Nice job OpK. Brand new!!