1976 40hp rude powerhead removal plzzzz help

[jdeezy]

Okay now, I'm trying to take off the whole block. I looked at numerous thread already. Didn't find any pics about it. Exactly how do I get it off? I removed everything extra Carb, fuel lines, wire harness, coils etc.... how many bolts are there? What am I doing wrong?

 

[Chinewalker]

Re: 1976 40hp rude powerhead removal plzzzz help

There will be the visible bolts around the base of the belly pan, on the outside, seven small, and two larger bolts. Plus, I believe there are a pair of studs with nuts on them inside the belly pan, below the carb.

If the powerhead is still stuck at that point, some gentle persuasion with a prybar might help...

 

[ACAMS]

Re: 1976 40hp rude powerhead removal plzzzz help

Don't forget the shift rod!

I always find it easier to remove the lower unit first.

 

[jdeezy]

Re: 1976 40hp rude powerhead removal plzzzz help

Well I got it...started about 8am and all it was were the 2 studs in front. Thank you for the help