1976 Chrysler 62Hg

[Mike 1]

I would like to see if anyone can tell me how to wire in a kill switch. I have a 2 cyl eng. I have to use choke to stop eng. I bought a new switch but it did not come with directions. Thank you.

 

[Frank Acampora]

Re: 1976 Chrysler 62Hg

Is that a 6 HP engine with magneto ignition? If so, there will be two black or brown wires that look like lamp cord coming from under the flywheel. These are the kill wires. one wire goes to each terminal on the switch. If you don't have them, you can use lamp cord and wire one wire to each point set terminal. Then wire the other end to the switch. Pushing the switch makes contact and shorts the points together, stopping the engine.