1983 470 merc alternator kit

[fmalott]

when i replace the voltage regulator with a alternator conversion kit what do i do with the old voltage regulator just snip wires do i take it of the motor or just leave it on

 

[EddiePetty]

Re: 1983 470 merc alternator kit

....most conversion kits that I have seen have detailed instructions for the installation, including wiring connections and isolations.

I elected to remove my old regulator and stator in an effort to reduce the weight I was lugging around. While removing the regulator I took the time to replace the former water supply hose from the transom nipple with fiber reinforced clear hose to the heat exchanger. I can now SEE my cooling water flow should I get an overheat symptom.

 

[TiredoleBoy]

Re: 1983 470 merc alternator kit

I left everything on. I used wire nuts on the cut wires and taped them well. Eventually I may pull them off.

 

[fmalott]

Re: 1983 470 merc alternator kit

so there is no risk leaving on or taking off, if i leave on just tape the wires really good if i take off i just have to replace water supply hose. thanks for advise
i'm glad this forum is here i'm new to I/O there is alot to learn