1983 EVINRUDE 9.9 prop size

[Edson15]

Just purchased a 1983 9,9 Evinrude outboard motor. I am looking for a spare prop,and owners manual for it. Are there any web sites were one can be found. Prop has no markings on it, but it is a 3 blade. Model # E10rctr. Thanks

 

[tashasdaddy]

Re: 1983 EVINRUDE 9.9 prop size

manuals here: http://www.kencook.com/evinrudejohnsonmanuals/

prop clik marine store top of page search prop.

 

[Edson15]

Re: 1983 EVINRUDE 9.9 prop size

Thanks. What I need is the pitch of the stock prop so I know what to order. I don't have a manual or owners manual.
Also looking for an owners manual for this engine. Thanks

 

[Edson15]

Re: 1983 EVINRUDE 9.9 prop size

Anyone with a spare 1983 9.9 owners manual?

 

[riverjet502]

Re: 1983 EVINRUDE 9.9 prop size

I run a 8-1/4 X 8-1/2 ....3 blade

 

[ezeke]

Re: 1983 EVINRUDE 9.9 prop size

Most props have the number stamped on the rear of the hub, so you have to remove the prop to find it. If you have the number you can match the propeller or find an aftermarket one here:

http://www.iboats.com/mall/propfinder/?**********=134612224&*******=867626582

 

[Edson15]

Re: 1983 EVINRUDE 9.9 prop size

Thanks everyone, the help is appreciated.

 

[Edson15]

Re: 1983 EVINRUDE 9.9 prop size

Still looking for an owners manual for a 1983 evinrude9.9.