1988 Force 85HP carb rebuilt kit part number

[TexasBayFisher]

Need 3 carb kits (1 per carb) for a 1988 Force 85HP I'm seeing two Sierra part #'s

18-7037 (includes many/all parts)
18-7033 (includes less parts, costs more)
18-7041 (needle and seat only)


I believe 18-7037 is the one I need, but why the other part #'s?
What has me confused is why the kit with less pieces costs MORE MONEY.

I need: carb/engine gasket, bowl gasket, needle valve, seat, float pin, o-rings

PAGE 6
http://www.outboardparts.com.au/Catalogues/chrysler_force_full.pdf


Can someone shed some light on this?

 

[eurolarva]

Re: 1988 Force 85HP carb rebuilt kit part number

FK10125 is the part number I would go with. One site I saw the 7033 but force experimented with so many different carbs that that generic kit may not work for your motor. Post your model number that might help.

 

[TexasBayFisher]

Re: 1988 Force 85HP carb rebuilt kit part number

Only problem is I'm not sure what's included in that kit.
Though I did find it for $15.40 here:
http://www.boats.net/parts/detail/merc/M-FK10125.html

Has anyone with a late 80's 85HP Force rebuilt their carbs?
I'd like to know if Sierra has one that'll work
Just want to redo the carbs to ensure the needle valves seal, replace the pin, and install a fresh bowl gasket and engine/carb mating gasket.

Is there a kit that includes the needle valve, the 2 gaskets, and those parts mentioned?
I've spent a few hours lookin around and cannot pinpoint which kit is required, and since I need 3 of them I don't want to buy the wrong ones.

 

[TexasBayFisher]

Re: 1988 Force 85HP carb rebuilt kit part number

Has anyone used one of these kits on an 85HP carb?
Let me know which kit to order. Thanks!