1989 Force 125, main jets are different size

Cyclone

Seaman Apprentice
Joined
Feb 7, 2005
Messages
48
Top carb has a .094, bottom has .1015. Is this normal, or should I even them out? If so, where can I buy one? Thanks.
 

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,605
I have no experience about you particular engine. However, you could go on to any Force engine parts site and look up your particular engine and see what the part numbers are for the two carb jets. That would verify if they are different or not. Or even talk to most any marine service shop and ask them. I'm sure they would know as well...
 

Nordin

Commander
Joined
Jun 12, 2010
Messages
2,588
I do not know if you mixed up when you wrote the thread. But the bottom carb shall have 0,0937 main jet from sea level up to 1500 foot and the top one 0,101 from sea level up to 1500 foot.
 

Cyclone

Seaman Apprentice
Joined
Feb 7, 2005
Messages
48
Thx Nordin, you're right, I did mix up the info. Looks like I'm good to go.
 
Top