I had previously replaced ignition key switch due to lost key. Unfortounately i installed it upside down. So today, i decide the weather was nice and i would flip the key switch over and do the job properly. Before i started, starter, electric choke and trim would all work. I was being a dumb a** and did not disconnect the battery. Somewhere along the way, something happened and nothing would work any longer. I traced the wires into the engine and i have power to the engine. The key will no longer work the starter or the electric choke and the trim will not work either. Since there are two sepearte cables coming out of the engine to the ignition and the trim, I am hoping there is some master fuse, etc inside the engine cover that is causing all of the problems. I have a load tester and the battery is good and electricity is getting into the engine. I don't know where to turn. Any help would be appreciated. Thanks!
