I just picked up a 1994 120 hp V4 Model TLER and I started messing with it today and I noticed the VRO pump has already been by passed but fuel is leaking from the diaphragm and the fitting where the main fuel is supplied to the pump is broke. I am looking for the correct part number for a non VRO pump. I have done some internet searching and I believe the pump I need is part# 438559 but I am also seeing conflicting information on ebay that I could use a 18-7353 but I also see other information that pump only supersedes 438555 and 43386. Can anyone tell me the correct pump to use. I know I need the pump with 3 barbs but want to make sure I get a big enough pump to carry the fuel supply for 4 carbs. I have already done this on my other 65 hp johnson and it worked like a charm.
Here is the ebay link that shows I could use the 18-7353
http://www.ebay.com/itm/new-Marine-..._Accessories_Gear&hash=item3ce4180b52&vxp=mtr
Any help will;l be greatly appreciated.
I temporarily by passed the fuel pump and just used the bulb to keep gas in the carbs. It will start but not stay running. It has been sitting for 2 years and I plan on doing the following. Compression 120 psi on all 4 cylinders
Water Pump
New Plugs Ql77jc4
Rebuild all 4 carbs
Fuel Pump
All new fuel lines
Can you think of anything else I am forgetting?
Here is the ebay link that shows I could use the 18-7353
http://www.ebay.com/itm/new-Marine-..._Accessories_Gear&hash=item3ce4180b52&vxp=mtr
Any help will;l be greatly appreciated.
I temporarily by passed the fuel pump and just used the bulb to keep gas in the carbs. It will start but not stay running. It has been sitting for 2 years and I plan on doing the following. Compression 120 psi on all 4 cylinders
Water Pump
New Plugs Ql77jc4
Rebuild all 4 carbs
Fuel Pump
All new fuel lines
Can you think of anything else I am forgetting?