Here was the problem I found.
I had a miss on the motor, acutally it was only running on 1 or 2 cyls. After a few parts and alot of troubleshooting I found the problem last night.
If I raise the back of the IR sensor about a 16th of an inch it fires on all cyls. If I let go of it is only fires on one or two. It seems that the plastic peice that the sensor mounts to is week or worn down.
Anyone ever seen this before or have a fix for it? I bent a peice of hard plastic over removed the sensor and secured it under the sensor to give it some spring up support but I don't like this repair so I am looking for something better.
I looked at a parts break down and they do not really show the sensor mount or the other parts around it, only the cover.
Anyone have an idea?
I had a miss on the motor, acutally it was only running on 1 or 2 cyls. After a few parts and alot of troubleshooting I found the problem last night.
If I raise the back of the IR sensor about a 16th of an inch it fires on all cyls. If I let go of it is only fires on one or two. It seems that the plastic peice that the sensor mounts to is week or worn down.
Anyone ever seen this before or have a fix for it? I bent a peice of hard plastic over removed the sensor and secured it under the sensor to give it some spring up support but I don't like this repair so I am looking for something better.
I looked at a parts break down and they do not really show the sensor mount or the other parts around it, only the cover.
Anyone have an idea?