1995 alpha 1 gen 2 trim pump need i littel more help

[tommays]

my pump got mounting bracket rot saged down and banged the oil tank enough to allow some rain water to milk the oil.<br />removed and flushed out entire trim system off boat and no damage but i noticed in the tank that there seams to be the lefovers of two nylon strainers on the oil pickups pumps well but it looks like you would need a new pump intake to get the strainers as they look pressed on<br /><br />any help or a part # would be great<br /><br />thank you<br />tommays

 

[achris]

Re: 1995 alpha 1 gen 2 trim pump need i littel more help

<br /><br />If you're refering to item number 4, it's part number is 35-89496.<br /><br />Chris............

 

[tommays]

Re: 1995 alpha 1 gen 2 trim pump need i littel more help

# 4 would be the part thank you for the picture my pump seams to have two i will have to stop at the dealer<br /><br />thank you<br />tommays

 

[texomatom]

Re: 1995 alpha 1 gen 2 trim pump need i littel more help

If you haven't paid for the mounting bracket yet, you might look on EBAY. I replaced my rusted out bracket with a stainless one for about 1/2 the price of the Merc part.<br /><br />Just a thought ....<br /><br />Tom

 

[tommays]

Re: 1995 alpha 1 gen 2 trim pump need i littel more help

thanks paid for the overpriced merc one but installed on 3/4 high plastic risers with longer ss lag bolts <br />i think that now that is not sitting in water but above the deck it should not rust again for a long time because it was only bad were it touched the deck<br /><br />tommays

 

[tommays]

Re: 1995 alpha 1 gen 2 trim pump need i littel more help

i need a litel more help the trim system is back toghter and working but i notice that the oil in the tank gets foamey with tiny air bubles which clear up again after sitting <br />i have bled out the system by the service manual steps and it does not sag when trailering but the air bubbbles make we wonder if the pump is on the way out<br /><br />thanks <br />tommays