I had a couple small leaks in the windows so I thought I would replace the seal on one window. Man it was a lot of work, I pulled the window off of the side which is glass and the aluminum trim that goes around it. The aluminum trim seemed to have some spongy gasket material in it. I removed all the material and cleaned it all up to a polish. After 6 or so hours of labor and on one window out I put it all back together with 3M 4200, so no gasket. My question is, is 3M 4200 enough, should I have used the gasket? What I did for all the other windows is pulled the trims off from the interior and ran a bead of 4200 around all the windows from the inside, another question will this work to seal the windows?
Thanks
JKru
Thanks
JKru