1997 Sanpan SP2200 specs

[mtsand]

Does anyone know where I can get boat specifications for my 1997 sanpan sp2200. My trailer was stolen over the winter and I need to know the toon sizes before I purchase another one. I keep my boat in the water three hours from my house and I didn't want to make that drive for measurments.

 

[lncoop]

Re: 1997 Sanpan SP2200 specs

You know it's 22' long. It most likely has 25" toons. What else do you need to know? Just about any tandem axle bunk trailer set up for a barge will work. Here is a great place to buy one. http://pontoonstuff.com/pontoon-boat/73-bunk-style-pontoon-trailers.asp If that's not convenient your local boat dealer can get you one. Or, if you want it straight from the horsey's mouth, http://nauticglobalgroup.com/. Welcome to iboats.

 

[EGlideRider]

Re: 1997 Sanpan SP2200 specs

The trailer should be fully adjustable, so buy one of the correct length and then adjust it when you get there. Make sure you adjust the winch post for the proper tongue weight which I would guess to be about 300 lbs for that boat. (10% of the total weight) The exact amount is not critical, just make sure that it's close.

 

[Jeep Man]

Re: 1997 Sanpan SP2200 specs

In this case, size doesn't matter. Some later model boats have an 8'6" width and older ones are 8', consequently, the trailer would need adjustment. But otherwise, any trailer for a 22' would be ok. Go galvanized if you're dealing with salt water.