2 wire power tilt & trim relay

[Dennischaves]

I have a 2 wire (blue & green wires) power tilt n trim
my control box has just the switch
can someone point me in the right direction to wire it up
do they sell a kit with the relays or whatever I may need to wire it up

 

[jakedaawg]

Let's start with the model number of engine, style of controls,and is this motor new to you? Is it already rigged on the boat or are you attempting to install yourself?

 

[Dennischaves]

its a used motor that I had as my back up
I know the relays and wires were left on the old boat
I have top mount controls with the switch to control the tnt
it has a red blue and green wire coming from the switch
thats all I have for it and a blue and green wire from the tnt motor
im not sure of the year the motor is
model num 85ETLR780
is an 85hp

 

[jakedaawg]

Yep, you need one of the old boxes. Would have been near the transome, but you know that already. Before my time. You could build your own with solenoids. I believe the wire schematic for these is in the top secret sticky file at the top of the page.

 

[Dennischaves]

is there anything available that's to save some time on the wiring and tracking down the solenoids
or what solenoid would I need?