Here try the lower question's to get a more accurate picture and better reuslt's......Nice boat. Can you post a pic of your transom hull area it appears to have a pad or a notch..
Read This First!! December 22nd, 2008, 10:11 AM
ESSENTIAL DATA REQUIRED
When posting a question about propellers, you cannot get a reasonable answer unless you provide the following information in your post: Items 1-4 are essential for meaningful response to most questions.
1) Performance issue you are trying to correct........................................... ........................................

2) Current prop manufacturer, model, aluminum or stainless as a minimum.
3) Current prop diameter and pitch (required).
4) Wide open throttle....... RPM........ and speed with an average load (very helpful)
5) Engine/drive make, model, year, and HP,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,....................................... Post your gearing on the drive its on a metal stamp on mid of the leg
6) Boat make model, year, length and weight
The below link would be a much more thorough list of data to provide if you're looking for detailed performance numbers,
http://forums.iboats.com/prop-questi...ml#post2336620
Ahh got it...pad and a small v interesting gearing is all that is needed.