2006 90 hp not peeing

cvtech1

Petty Officer 1st Class
Joined
Aug 16, 2009
Messages
277
My 90 hp was running fine until it wouldn't stay running. I took it to a shop in Houston Tx and they rebuilt the whole engine and after all that was done it was a simple bulb hose. It never ran the same and now it stop peeing from the back. What could be wrong? I called the shop and they say it could be a clogged line. Any ideas to keep me from going back to surgery for hang nail.
 
Last edited:

99yam40

Fleet Admiral
Joined
Sep 7, 2008
Messages
9,116
If it is something plugging the tell tail outlet, blowing compressed air into it while running on water hose can help, or running a piece of weed wacker line up it can help also if wasps have built a nest it there
 

Boulton2009

Cadet
Joined
Feb 29, 2016
Messages
10
Use metal coat coat hanger and poke around the outlet... they might have installed the impeller upside down/backwards.,....??
 

cvtech1

Petty Officer 1st Class
Joined
Aug 16, 2009
Messages
277
I stuck a wire down it not up. It didn't really help, a little water tried to come out. Now that you said the impeller could of been put in backwards this might be par for the mechanic that tore my engine down because he missed a bad hose. Thanks guys.
 

cvtech1

Petty Officer 1st Class
Joined
Aug 16, 2009
Messages
277
Hello and thanks for your suggestions. I took the cowling off this morning and removed the hose from the motor, I then stuck a wire into the motor and then the hose. I put the muffs on and cranked her up and a strong water stream was there. Put it back together and running and peeing great.
 
Top