2007 Suzuki Trim sender df200

[burkleyr]

I bought a new 2007 suzuki DF200. I also bought a trim guage (sterling edition). I am trying to hook up my guage so I will know where the motor is set at. I was told to buy a trim sender, but then a mechanic told me they were already mounted on those engines. I need to find out where to hook the guage to (I guess I need a wire diagram or picture of what I need to hook the guage to). I have been told to hook to a harness that has a black wire and a yellow wire, with a clear harness. Well I found a black wire and a white with a yellow strip, and a clear harness. But I just want to make sure so I won't hurt anything!

 

[lakensea]

Re: 2007 Suzuki Trim sender df200

As long as you bought a Suzuki gauge, you will see the mating connector up under the dash area. Just plug it in and wire in the light to your other gauges.

 

[burkleyr]

Re: 2007 Suzuki Trim sender df200

Thanks for the reply but it is actually a telflex gauge to match the other gauges. I am just trying to find out which are the exact wires I need to hook the gauge to. I realize I will have to cut off the harness but just want to make sure I am cutting offtaping into the correct harness. Any pictures of the exact harness would be awesome!

 

[hopalong]

Re: 2007 Suzuki Trim sender df200

I may be wrong but I dont think the Suzuki trim sender at the motor is compatable with the Teleflex gage. You may need the Teleflex trim sender?

 

[burkleyr]

Re: 2007 Suzuki Trim sender df200

OK I found the answer, It is a black wire and a white wire with yellow strip, the harness is clear with purple at the end.