wmgraphics
Seaman Apprentice
- Joined
- Jun 30, 2008
- Messages
- 47
I have a new 60 efi and I want to connect teleflex analog tach, trim and temp gauges from my control box by either tapping into the smartcraft plug or using the other wires. Can this be done and how?
Smarcraft plug wire colors as followed...
red, black, orange, green, blue, white, grey, purple.
Other wires off remote control...
red, blue/white stripe, yellow/ blue stripe, brown/ blue stripe, green/white stripe.
As far as I know this motor does NOT come with a trim sender installed and I would have to do this and attach (brown/white stripe) wire from it to the sender post on the trim gauge?
If anyone has any ideas or similar setup please let me know. Thanks!
Smarcraft plug wire colors as followed...
red, black, orange, green, blue, white, grey, purple.
Other wires off remote control...
red, blue/white stripe, yellow/ blue stripe, brown/ blue stripe, green/white stripe.
As far as I know this motor does NOT come with a trim sender installed and I would have to do this and attach (brown/white stripe) wire from it to the sender post on the trim gauge?
If anyone has any ideas or similar setup please let me know. Thanks!