3 blade to 2 blade prop

[underpressure]

i recently spun the hub on my 3 blade prop on my 1975 15hp johnson motor,went to my local marina and they have a 2 blade prop 9.5 x 10 and he also has a 3 blade 9.5 x 10 prop ,he told me the 2 blade prop is a weedless prop and that i would not notice much of a difference between the 2 props ,my boat is a 14 foot starcraft ,there is a 50 percent price difference in the props ,the 2 blade being the cheaper prop at 60 bucks ,just want other opinions before i purchase this prop due to the fact that i dont really know ,and he is trying to get me to take the cheaper prop,any advice is appreciated

 

[Bifflefan]

Re: 3 blade to 2 blade prop

i doubt the 2 blade will come out of the hole as good, but it may run fine on the top.
id go to west marine or gander mountian if you have them and look there at some on them. they have interchangable ones that should work well.

 

[hwsiii]

Re: 3 blade to 2 blade prop

Pressure this what they have available here at Iboats and for $ 115 you an have a stainless steel one.

H