3 HP Gamefisher

[artee]

Going to look at a used Sears outboard. The person told me he thought it was a 1986. The last time he ran it was 2 years ago. If it needs a water impeller or anything else, can parts be found? Sorry, I don't know model # yet. He is asking $125.00, if this motor runs good, is this a decent buy, or should I stay away from a Sears outboard?
thanks.

 

[bluebrownie]

Re: 3 HP Gamefisher

searspartsdirect.com has most the parts for the sears motors....get the serial number to see when it was made...post or go to http://www.discount-marine-parts.com/ob_sears.html to get the year it was made....if it runs, offer 100 bucks....they are good little motors,,.,. i have had a 3 hp and also presently have a 7.5 hp...runs llike a top, 1977.... circa.... good luck

 

[steelespike]

Re: 3 HP Gamefisher

If this is an Eska built motor they are a fair entry level motor.But they vibrate are somewhat noisy and under powered.Some ignition parts are difficult to find and expensive.If it was mune to do I would save the money toward the marvelous little Evinrude/Johnson 3hp made for many years dating back to the 50s.This is a smooth quiet and dependable motor.Routine parts are readily available all the way back.Some right here at Iboats.

 

[artee]

Re: 3 HP Gamefisher

It is a model # 298.586193. Looking through the link (http://www.discount-marine-parts.com/ob_sears.html) I think it is a 1988 motor made by Tanaka. Are parts available for this model (at least a water pump if needed)? Thanks

 

[steelespike]

Re: 3 HP Gamefisher

I believe Tanaka is out of business. It doesn't use a water pump. as the powerhead is air cooled.The 3 hp has a sort of cintrifical clutch under the power head that I believe can be problematic both in operation and service.Some 3hp have electronic ignition I don't know about the reliability or availability of ign. parts.You might check the net for parts availability.