Hi,<br />I'm having a little trouble with my lower unit on my outboard. It's a hardly used '67 9.5 evinrude.<br />I recently changed the seals in the lower unit because the oil was getting milky, and I don't think it'd been done in a while (if ever).<br /><br />I took it all apart just fine, cleaned out all the old junk, bought new seals, and put it back together.<br /><br />I noticed now that a little oil leaks out the seam on the lower unit now. I was very careful not to force anything.<br /><br />Before I take it apart again to make sure I didn't pinch my spaghetti seal in there weird, I want to know if there's a "seal helper" out there that I can smear along the seals to help them do their job.<br /><br />It's a sweet motor, and this is the only thing wrong with it.<br /><br />thanks.
