73 evinrude/ Johnson 50 hp engine wiring help.

[Texas Prowler]

Hi guys! I'm hoping someone has this engine or a wiring diagram of it and can help. I'm trying to figure where the wires for the coke solenoid, temp sensor and neutral safety switch are landed on the terminal block. I took them off with plans of replacing them and can't find my pictures.Thank you all for your time.

 

[jbuote]

According to the diagram I have, (which isn't the best, but) the neutral start switch is in the remote control. doesn't go to the terminal block.
​The safety switch on the engine goes to one of the starter solenoid posts, not the terminal block..
​Thermo switch purple wire goes to post 4 on terminal block, Choke solenoid purple/yellow goes to post 5, and choke solenoid purple/white goes to 6.

​Here's the diagram I have if it helps.
View attachment 73_50hp_wiring_diagram.pdf
​
​There are probably better diagrams out there, so if you get hold of one use that instead.
​Hopefully this gets you started though.. lol

 

[Texas Prowler]

Thanks! That's just what I needed!