76 Evinrude 70hp replacement controls

travelship

Cadet
Joined
Jan 14, 2009
Messages
18
I have a '76 Evinrude 70hp with the Power Pilot controls. The controls appeared to be locked up and will not go into reverse, the engine also will not crank with the key. I read that this is common with the Power Pilot. Are there any other controls (preferably new) that will work with this engine, or do I have to rebuild mine or find a used one? I searched and haven't been able to find a definitive answer.
 
D

DJ

Guest
Re: 76 Evinrude 70hp replacement controls

You MAY find some new old stock ones on ebay.

Any of the controls that have the BIG RED PLUG in the harness will work, up to 1991, I believe.

The controls that are System Check compatible will NOT work without an adapter.

I just plugged my 1989 controls into my 1975 50 HP. No problem.

By the way, your old controls have a clip on the throttle cable (engine end). You will need that clip with the newer style cables.
 
D

DJ

Guest
Re: 76 Evinrude 70hp replacement controls

These will work.

Look at item #140295866838 on ebay.

The newer style control box is much easier to work with. The case is just two halves instead of three. It also has a kill switch and built in (Handle) trim and/or tilt switch.
 

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: 76 Evinrude 70hp replacement controls

that one is in the best condition of any i have seen on ebay. worth the $$$$
 

travelship

Cadet
Joined
Jan 14, 2009
Messages
18
Re: 76 Evinrude 70hp replacement controls

I figured your opinions were to be respected, being Mods with many posts. Unless, of course, you're actually the seller:D. I bought it, should be here tomorrow.
 
Top